|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-20-2021, 02:23 PM | #1 |
Getting Wild
Join Date: Mar 2021
Posts: 97
|
Alltrax Controller - Scottyb
Hey Scottyb - just purchased a controller from you - appreciate the fast service.
I purchased a 400Amp controller for a Yamaha G29 drive. Everything on the cart is stock. I installed it and everything working as normal. Your website states 22-23 MPH with more torque. Right now, it's going 13-14 MPG with regen on. The computer I own has security blocking the Alltrax programming. Do you know of another way to unlock this controller? Tried to DM you but your account is full Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-20-2021, 03:53 PM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
|
Re: Alltrax Controller - Scottyb
You are going to need the Alltrax software to make adjustments to your controller. My G29 does 25 but I had to make some setting changes to get that speed out of it.
|
09-20-2021, 03:58 PM | #3 |
Getting Wild
Join Date: Mar 2021
Posts: 97
|
Re: Alltrax Controller - Scottyb
I spoke with Scotty - I also called Alltrax - they think the original "speed sensor" is checked. VA - what were the settings you looked into?
|
09-20-2021, 04:23 PM | #4 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
|
Re: Alltrax Controller - Scottyb
Turbo mode must be on to get anywhere close to max RPM. Max RPM needs to be over 6000. You need the correct Field Map for your motor. You are losing out on lots of good info and really one of the great features of the Alltrax if you don't have the software. You need to make a data log while driving to see what is limiting your speed. Alltrax support can't help you if you can't tell them all of the settings.
|
09-20-2021, 04:28 PM | #5 |
Getting Wild
Join Date: Mar 2021
Posts: 97
|
Re: Alltrax Controller - Scottyb
Thanks sir!
|
09-26-2021, 08:15 PM | #6 |
Getting Wild
Join Date: Mar 2021
Posts: 97
|
Re: Alltrax Controller - Scottyb
Have the downloaded toolkit. Nice program! Scotty told me the controller is set for highest speed. The RPMs are just under 6,000. Does anyone know the max RPMs for a stock G29 Motor is? There are warnings not the change this setting above motor capabilities. I trust your judgement, VA, but just want confirmation so I don't blow up the motor.
Also, the "speed limit" box was checked which was hindering the top end speed. |
09-26-2021, 11:01 PM | #7 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
|
Re: Alltrax Controller - Scottyb
I'm not sure I would push the stock motor over 6000 RPM. With stock wheels and stock gears, that will probably get you to about 19mph - not more. Do a run with the logging program and see what RPM you are getting (and what mph that gives you) You can calculate things - stock gears are 12.5:1. Measure the tires and you can figure out what speed you can get at 6000 RPM. Did you enable Turbo mode? I went with larger wheels and gained a few mph on mine. I replaced the stock motor with a D&D motor when I put in the Alltrax and Lithium battery.
|
09-27-2021, 11:32 AM | #8 |
Getting Wild
Join Date: Mar 2021
Posts: 97
|
Re: Alltrax Controller - Scottyb
Here is where I am at. The Reverse settings and the forward settings are backwards - which means I may have cables backwards. When I select the forward gear to go slower, it's affecting reverse and vice-versa. Does this matter?
if so, Any changes you'd recommend? I have F1 to F1, F2 to F2... etc. I thought I nailed this install. |
09-27-2021, 11:34 AM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax Controller - Scottyb
Congrats on downloading and installing the swoftware. The max rpm for this motor is 6k. However I doubt the motor can make 6000 rpms at WOT. Most stock motors can not. This number is more of a downhill runaway speed limit.
Collect and share a monitor file with me so I can see what is keeping the cart from reaching it's potential. |
09-27-2021, 11:44 AM | #10 |
Getting Wild
Join Date: Mar 2021
Posts: 97
|
Re: Alltrax Controller - Scottyb
Thanks, Scotty. It only costed me buying a new computer... haha. Needed one anyways.
It FLIES in reverse and is slower in Forward. When I change the "reverse max speed to 100" it flies going Forward. I have to had screwed up the install somewhere. |
|
|
Similar Threads | ||||
Thread | Forum | |||
ScottyB Alltrax 500,wires,400A &202 install | Electric EZGO | |||
A quick praise to AllTrax and ScottyB! | Electric Club Car | |||
Scottyb XCT 400 Controller | Electric EZGO | |||
Shoutout to ScottyB! New Controller and loving this cart! | Electric Club Car | |||
Controller Question..... Scottyb or anyone else familiar with Alltrax AXE | Electric EZGO |