lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-07-2018, 12:06 PM   #1
Capt Ag
Not Yet Wild
 
Join Date: Oct 2018
Posts: 2
Default 48 to 12v reducer install issue

Installed a VOLTSeasy reducer on my 06 DS cart to power a Pyle Bluetooth Amp only. Not headlights. Appears I installed correctly as per instructions and volts are right on input and output. Amp works fine until I press accelerator and then nothing. Let off accelerator and amp comes back on. I havenít tested voltage output yet when accelerator on... need another set of hands. Is there something obvious that I might be missing? Maybe a ground issue? Appreciate any insight.
Capt Ag is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-07-2018, 03:43 PM   #2
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 15,025
Default Re: 48 to 12v reducer install issue

Sounds like your pack is weak and when you give it the throttle, the voltage drop is further then your reducer can support.

Hook a DVM up to the pack and lay it on your seat and see where it is dropping to when you hit the throttle.

Note- A fully charged pack is 50.93 volts.....
NoleFan4Ever is offline   Reply With Quote
Old 10-08-2018, 11:25 AM   #3
Capt Ag
Not Yet Wild
 
Join Date: Oct 2018
Posts: 2
Default Re: 48 to 12v reducer install issue

Thanks. My pack is good I think. Itís a 4x12 setup less than year old and output is +50v at idle but I donít know the drop under load so sounds like I need that from both the pack direct and via the reducer output before I can diagnose. Appreciate the help.
Capt Ag is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
RXV 48V to 12V Reducer install instructions Electric EZGO
Lookin to install 12v reducer Electric EZGO
DPI 48v-13v reducer install. Electric EZGO
12V Reducer Install Electric EZGO


All times are GMT -5. The time now is 11:55 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.