Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   Does the Admiral B2 motor have a 4 or 8 pole speed sensor? (https://www.buggiesgonewild.com/showthread.php?t=144446)

bubba4dad 07-26-2018 05:24 PM

Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
Im srtuggling... Need help

scottyb 07-26-2018 06:54 PM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
4 pole
All Admiral motors are 4 pole.
Most all OEM motors are 8 pole
I hope this helps

bubba4dad 07-26-2018 07:17 PM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
Ok, the controller I got from you is programmed for three different modes. 3000 rpm, 4000 rpm, and 5995 rpm. But it’s set to 8 pole.

PuttPutt 07-26-2018 11:02 PM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
Quote:

Originally Posted by bubba4dad (Post 1525436)
Ok, the controller I got from you is programmed for three different modes. 3000 rpm, 4000 rpm, and 5995 rpm. But it’s set to 8 pole.

???? so is mine

xct 48500 with admiral b2

scottyb 07-27-2018 09:08 AM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
The Admiral Field map is SUPPOSED to automatically set the 4 pole selection. It has in the past.
If it is not doing so now it must be an oversight with the latest revision. I will check this out today. Thank you

Select 4 pole for all Admiral motors.

scottyb 07-27-2018 12:25 PM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
I just checked as A4 and B2 and those maps set the 4 pole selection automatically as they always have. I'm wondering if you guys are updating your controllers and resetting defaults when prompted. Default would be 8 pole.

What maps specifically are you running ?

bubba4dad 07-27-2018 04:48 PM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
I did not reset mine to default.
When I finished the installation I took it for its break in drives. All three ml3 switch positions resulted in the same top speed of 28.4 mph. I questioned this and figured it might be due to the 8 pole setting. I have since switched it to 4 pole and it seems to be working correct on mode 1 or “normal” as it runs right at 3000 rpm and a speed of about 15 mph. Mode 2 increases the rpm to about 3500 or approximately 19 mph. Mode 3 actually goes up to about 4000 rpm or about 24 mph and then slows down to about 3500 rpm and a speed of about 19.
The field map loaded is RHMOT-B2-V4.
So I’m back to being confused again.
Still need help!

bubba4dad 07-27-2018 04:49 PM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
I have never been prompted to reset to defaults.

bubba4dad 07-27-2018 04:56 PM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
I did notice when driving with the laptop connected that my throttle % peaked at 90%. Is there a calibration for that?

bubba4dad 07-27-2018 05:08 PM

Re: Does the Admiral B2 motor have a 4 or 8 pole speed sensor?
 
1 Attachment(s)
Not sure if it helps but I took a snapshot of the controller and have atached it here.


All times are GMT -5. The time now is 08:40 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.