|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-20-2010, 11:42 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2010
Location: Walhalla S.C.
Posts: 59
|
problem with short belt
I installed a short belt on my 99 TXT and the first thing is it sounds like the motor revs up quicker almost like the belt is slipping. And sometimes when there is a load on it like hill climbing the belt will start squecking. Will the shifting from forward to reverse get better with wear? thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-20-2010, 01:58 PM
|
#2 |
|
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: problem with short belt
Yes driving it will break it in and it will settle out.
|
|
|
|
|
06-20-2010, 02:03 PM
|
#3 |
|
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: problem with short belt
The higher rpms are normal and as you drive it...it will break in and settle itself out.
|
|
|
|
|
06-20-2010, 02:26 PM
|
#4 |
|
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: problem with short belt
The motor will rev higher b/c you have changed the gear ration within the clutches due to the shorter belt. This is normal and not the belt slipping. A little rockin back n forth while applying pressure to the shifter will help with the shifting prob until the belt gets broke in. That sqealin under load is the carts ability to move the drive clutch with the belt in it's new position. It rides so low in the drive clutch the cart now has enough umph to turn the drive clutch inside the belt. As the belt wears it will get better. Mine did anyway and it performs great...
|
|
|
|
|
06-20-2010, 02:33 PM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2010
Location: Walhalla S.C.
Posts: 59
|
Re: problem with short belt
Thanks guys ill keep running it then. Would it help or hurt if i did the 28 degree drive clutch also.
|
|
|
|
|
06-20-2010, 03:07 PM
|
#6 |
|
Gone Wild
Join Date: Apr 2009
Location: indiana
Posts: 274
|
Re: problem with short belt
ive never had any problems with the stock belts, sounds like to many cons on the shorter belt, "let it wear in, it will work itself out" , i got 23mph with just bigger tires and it climbs walls if you let it
 |
|
|
|
|
06-20-2010, 05:32 PM
|
#7 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: problem with short belt
You can not use the shorter belt and the 28 degree clutch ramps. It is just too much, better off with one or the other...
|
|
|
|
|
06-20-2010, 06:13 PM
|
#8 |
|
Not Yet Wild
Join Date: Jun 2010
Location: Walhalla S.C.
Posts: 59
|
Re: problem with short belt
Ok thanks I think ill just keep the belt and see what happens. Unless someone has tried both and one is better then the other.
|
|
|
|
|
06-20-2010, 06:18 PM
|
#9 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: problem with short belt
Quote:
Yes I have tried one, then the other, then both  The 28 degree clutch is by far the best if you send it to TOM a CPP to be machined for the lowest gear possible But that costs alot more than a $20 short belt..... so the belt is the best improvement for $20 and the machined 28 degree clutch is the best improvement without going to a bigger motor ....... hope this helps |
|
|
|
|
|
06-20-2010, 06:46 PM
|
#10 |
|
Not Yet Wild
Join Date: Jun 2010
Location: Walhalla S.C.
Posts: 59
|
Re: problem with short belt
Yes thanks
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Short Belt | Gas EZGO | |||
| '92 carryall with new engine, belt slips even with new belt and motor set far forward | Gas Club Car | |||
| 87 ezgo drive belt problem | Gas EZGO | |||
| 82 Clutch/Belt problem | Gas EZGO | |||
| WOW ! Short belt ! | Gas EZGO | |||
Linear Mode
