lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-22-2018, 12:14 PM   #1
sand dune coon
Not Yet Wild
 
Join Date: May 2017
Posts: 49
Default v-glide use with allrax controller

good morning,

doing a solid state upgrade on a 93ds - the cart is currently a v-glide resistor cart. Is it possible retrofit my high amperage style v-glide with small resistors like on the new models to achieve the 5k-0 signal ? installing 48500 and HD sol

i know the throttle response wont be the best but i dont care - trying to keep this cheap and easy. i did some searching and couldn't find much.

thank you in advance.
sand dune coon is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-22-2018, 12:22 PM   #2
LukeL
Gone Wild
 
LukeL's Avatar
Yamaha
 
Join Date: Jun 2017
Location: Savannah, GA
Posts: 5,216
Default Re: v-glide use with allrax controller

I have heard that it is possible to get a 0-5K although not a very precise one. Iíve never done it, and with the PB-6 and similar being easy to retrofit, Iíve never needed to.


Club Car DS driverís club #59
LukeL is offline   Reply With Quote
Old 10-22-2018, 12:29 PM   #3
KRAZYMATT
Gone Wild
Club Car
 
Join Date: Aug 2010
Location: Central Florida
Posts: 1,129
Default Re: v-glide use with allrax controller

ive inquired about the conversion and got some good input from "haulna$$" on here he posted couple wire diagrams and explained how to convert stock vglide to work with altrax sr 500 amp solid state controller...

http://www.buggiesgonewild.com/elect...001-94-ds.html

see post #8 at above thread. very helpful
KRAZYMATT is offline   Reply With Quote
Old 10-22-2018, 12:36 PM   #4
sand dune coon
Not Yet Wild
 
Join Date: May 2017
Posts: 49
Default Re: v-glide use with allrax controller

Quote:
Originally Posted by LukeL View Post
I have heard that it is possible to get a 0-5K although not a very precise one. I’ve never done it, and with the PB-6 and similar being easy to retrofit, I’ve never needed to.


Club Car DS driver’s club #59
is there a kit available to mount the pb6 in the same vicinity at the v-glide?
sand dune coon is offline   Reply With Quote
Old 10-22-2018, 12:42 PM   #5
sand dune coon
Not Yet Wild
 
Join Date: May 2017
Posts: 49
Default Re: v-glide use with allrax controller

Quote:
Originally Posted by KRAZYMATT View Post
ive inquired about the conversion and got some good input from "haulna$$" on here he posted couple wire diagrams and explained how to convert stock vglide to work with altrax sr 500 amp solid state controller...

http://www.buggiesgonewild.com/elect...001-94-ds.html

see post #8 at above thread. very helpful
i saw this thread during a search but that particular v-glide looks as if it controls a controller already. ( if that makes sense )
my v-drive is a high amperage style where the actual line amperage is going though it.
basically, i knew the size of the resistors in the picture on your thread i can convert mine.. i think..
sand dune coon is offline   Reply With Quote
Old 10-22-2018, 12:54 PM   #6
KRAZYMATT
Gone Wild
Club Car
 
Join Date: Aug 2010
Location: Central Florida
Posts: 1,129
Default Re: v-glide use with allrax controller

Quote:
Originally Posted by sand dune coon View Post
i saw this thread during a search but that particular v-glide looks as if it controls a controller already. ( if that makes sense )
my v-drive is a high amperage style where the actual line amperage is going though it.
basically, i knew the size of the resistors in the picture on your thread i can convert mine.. i think..
yes that makes sense, your cart is a resistor cart and does not have an existing solid state controller. i wish could be more help i am just gathering info and parts to do conversion in the future, havent actually gotten into it yet.
KRAZYMATT is offline   Reply With Quote
Old 10-22-2018, 01:16 PM   #7
HaulnA$$
Getting Wild
Club Car
 
Join Date: May 2018
Location: Lavon, TX
Posts: 105
Default Re: v-glide use with allrax controller

Quote:
Originally Posted by sand dune coon View Post
i saw this thread during a search but that particular v-glide looks as if it controls a controller already. ( if that makes sense )
my v-drive is a high amperage style where the actual line amperage is going though it.
basically, i knew the size of the resistors in the picture on your thread i can convert mine.. i think..
You can convert yours. See attachment. Be sure to install a jumper between post 2 and post 3. HTH
Attached Images
File Type: png 4B305901-45E2-44A1-9147-97225D92D737.png (173.8 KB, 0 views)
HaulnA$$ is offline   Reply With Quote
Old 10-22-2018, 02:43 PM   #8
sand dune coon
Not Yet Wild
 
Join Date: May 2017
Posts: 49
Default Re: v-glide use with allrax controller

Quote:
Originally Posted by HaulnA$$ View Post
You can convert yours. See attachment. Be sure to install a jumper between post 2 and post 3. HTH
exactly what i was looking for,, thank you sir.
sand dune coon is offline   Reply With Quote
Old 10-22-2018, 04:38 PM   #9
WalterM6
Gone Wild
 
WalterM6's Avatar
Club Car
 
Join Date: Apr 2017
Posts: 1,458
Default Re: v-glide use with allrax controller

Here's something to think about. Even with a MCOR the Alltrax doesn't have a very consistent throttle response. When your up and running try the "Absolute Throttle" in the Alltrax Toolkit. It is advertised as a precision throttle in the Alltrax literature. It really smoothed out my throttle response. My 2Ę
WalterM6 is offline   Reply With Quote
Old 10-23-2018, 12:48 PM   #10
sand dune coon
Not Yet Wild
 
Join Date: May 2017
Posts: 49
Default Re: v-glide use with allrax controller

Quote:
Originally Posted by HaulnA$$ View Post
You can convert yours. See attachment. Be sure to install a jumper between post 2 and post 3. HTH
would you happen to know if they are half watt resistors?
sand dune coon is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
No Voltage at Allrax (carts unlimitted conversion) Electric Club Car
allrax dcx300 performance Electric Yamaha
99 DS v-glide to controller conversion Electric Club Car
94 CC resistor V-Glide controller cart Electric Club Car
V-Glide and controller? Electric Club Car


All times are GMT -5. The time now is 03:48 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.