|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-15-2017, 03:19 PM | #1 |
Not Yet Wild
Join Date: Jul 2017
Location: new hampshire
Posts: 22
|
kingpin/ tie rod end torque specs
I'm replacing the kingpin bushings on my 2004 ds. I have the old ones out(no problem with an air hammer) and am going to chamfer and press the new ones in at work tomorrow(going to either use a press or giant vise).
can anybody tell me the torque spec for the kingpin nuts and tie rod ends? I have a .750 reamer. thanks in advance. tom |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-15-2017, 04:08 PM | #2 |
Not Yet Wild
Join Date: Jul 2017
Location: new hampshire
Posts: 22
|
Re: kingpin/ tie rod end torque specs
never mind.. got it...
kingpin 40ft# tie rod ends 18ft# |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
torque specs | Gas EZGO | |||
G22 Torque Specs | Gas Yamaha | |||
Torque specs | Electric Club Car | |||
Need torque specs | Clone Engine Swaps | |||
2008 Drive Torque on 'Kingpin' bolt | Gas Yamaha |