lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-11-2009, 08:43 PM   #1
MICHAEL
Not Yet Wild
 
Join Date: Feb 2009
Posts: 4
Default vinyl seat adhesive needed.

Hi I need an adhesive to reattach the white vinyl seat cusion back into the hard plastic frame. Any ideas on what to use?? Thanks
MICHAEL is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-11-2009, 09:30 PM   #2
Monsterezgokid
Kid no more!!
 
Monsterezgokid's Avatar
E-Z-GO
 
Join Date: Feb 2007
Location: Bradford, Ontario, Canada
Posts: 749
Default Re: vinyl seat adhesive needed.

3m Super 77



Just what you need, and works awesome. 3m products are the best
Monsterezgokid is offline   Reply With Quote
Old 02-11-2009, 09:31 PM   #3
Monsterezgokid
Kid no more!!
 
Monsterezgokid's Avatar
E-Z-GO
 
Join Date: Feb 2007
Location: Bradford, Ontario, Canada
Posts: 749
Default Re: vinyl seat adhesive needed.

Wait a minute. you mean the Black plastic back that covers the back of the wood?.. if so, that screws on!
Monsterezgokid is offline   Reply With Quote
Old 02-11-2009, 10:06 PM   #4
technician#2
Gone Wild
 
technician#2's Avatar
E-Z-GO
 
Join Date: Nov 2008
Location: Benton AR.
Posts: 253
Default Re: vinyl seat adhesive needed.

I thought the seat cover vinyl was stapled to the wood frame over the foam padding, and the black cover was bolted over all of this????
Maybe I'm wrong, but I've got a good excuse. I'M OLD!
technician#2 is offline   Reply With Quote
Old 02-13-2009, 12:18 AM   #5
MICHAEL
Not Yet Wild
 
Join Date: Feb 2009
Posts: 4
Default Re: vinyl seat adhesive needed.

Thanks guys. The supper 77 will not work in this application. The frame is a narrow abs plastic outer type L system. The thin vinyl cushion just is sitting in this frame and attached with a bead of some kind of adhesive. Almost like a caulk bead. The bead is opaque brown and still stuck to the vinyl seat. it has detached from the abs frame. I need a caulk type of adhesive that will attach itself to vinyl and to hard plastic. I can squeeze in a bead of adhesive in the frame and push the vinyl seat into the bead. hold it in place with weights until it drys. Thats the situation. Any ideas on what type of adhesive type material to use. The frame is not a large flat system. It is a narrow outer perimeter support system. vinyl only has about 1 inch of lip around the outer edge. Thanks again
MICHAEL is offline   Reply With Quote
Old 02-13-2009, 06:42 AM   #6
pizzamaker
****tard supreme
E-Z-GO
 
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
Default Re: vinyl seat adhesive needed.

Quote:
Originally Posted by MICHAEL View Post
Thanks guys. The supper 77 will not work in this application. The frame is a narrow abs plastic outer type L system. The thin vinyl cushion just is sitting in this frame and attached with a bead of some kind of adhesive. Almost like a caulk bead. The bead is opaque brown and still stuck to the vinyl seat. it has detached from the abs frame. I need a caulk type of adhesive that will attach itself to vinyl and to hard plastic. I can squeeze in a bead of adhesive in the frame and push the vinyl seat into the bead. hold it in place with weights until it drys. Thats the situation. Any ideas on what type of adhesive type material to use. The frame is not a large flat system. It is a narrow outer perimeter support system. vinyl only has about 1 inch of lip around the outer edge. Thanks again
pizzamaker is offline   Reply With Quote
Old 02-13-2009, 07:34 AM   #7
clutch
Getting Wild
E-Z-GO
 
Join Date: Sep 2008
Location: sterling heights mich.
Posts: 82
Default Re: vinyl seat adhesive needed.

how about contact cement ,or constuction adhesive?
clutch is offline   Reply With Quote
Old 02-13-2009, 07:40 AM   #8
scottyb
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 69,902
Default Re: vinyl seat adhesive needed.

There are many all weather silicone or latex base caulkings specifically designed for door and window applications out there at the home depot etc. But what these guys are telling you is that what you are describing is unusual. Normally the plastic back is simply sandwiched between the seat cushion backing board and the frame with the bolts?
scottyb is offline   Reply With Quote
Old 02-13-2009, 10:16 PM   #9
MICHAEL
Not Yet Wild
 
Join Date: Feb 2009
Posts: 4
Default Re: vinyl seat adhesive needed.

Thank you guys for all the good ideas. I think I fixed the prblem. The seat may be unusual, I do not know. The foam with viyl covering is just glued into a pvc frame. I went to NAPA, They did sell the 3m super 77 spray adhesive, which in this case does not work. But they sell a tube of 3M weatherstripping and gasket sealling material. It worked fine. So Far. Its like a thick contact cement. Bonded to both well. We shall see. I glued it , clamped it, put weights on it, and it seems to work. Thanks again for all your help. Michael
MICHAEL is offline   Reply With Quote
Old 02-13-2009, 10:22 PM   #10
scottyb
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 69,902
Default Re: vinyl seat adhesive needed.

glad you got it
How about posting a pic so we can see?
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Vinyl Seat cleaning Electric Club Car
Used CC Enclosure 1994-1999 Vinyl w/Full Back CHEAP! Golf Carts and Parts
Seat Kit Golf Carts and Parts
Any tips on installing new vinyl seat covers? Electric EZGO
Seat Golf Carts and Parts


All times are GMT -5. The time now is 06:27 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.