lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-07-2009, 07:54 AM   #1
jumbotron1
Not Yet Wild
 
jumbotron1's Avatar
E-Z-GO
 
Join Date: Jul 2008
Location: Gleason, WI
Posts: 14
Default 86 EZ GO problems

I've been having ignition problems with my 86 marathon with a 244 robin 2 cycle engine. So far I've replaced the coil and cdi box, to no avail. I'm thinking it's the pulser coil. Is there any way to test the coil so I know for sure? Any help would be appreciated.
jumbotron1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-07-2009, 08:51 AM   #2
Goat53
Gone Wild
 
Goat53's Avatar
 
Join Date: Jan 2008
Location: Lowndes County Ga.
Posts: 343
Default Re: 86 EZ GO problems

Welcome to the forum , I used the search feature and found this :
The way I understand how this system works, is the pulsar coil triggers the ignitor, which in turn triggers the ignition coil. The pulsar coil should read 75 ohms between the red and blue wires. If not, replace pulsar coil. There is not a test in the manual for the ignitor. They say, try a known good one, and if it works, replace the bad ignitor. There are two tests for the ignition coil. You should have 2.88 to 4.32 ohms between the orange and green wires. (primary of the coil) You should have 9.36 to 14.04K ohms between the orange wire and the sparkplug wire. (secondary of the coil) There is a discussion in another thread about a modification using an automobile coil. Check with ScottyB he can probably tell you where to find it. Capt. Ed



CaptEd
View Public Profile
Send a private message to CaptEd
Find More Posts by CaptEd
Add CaptEd to Your Contacts
Goat53 is offline   Reply With Quote
Old 02-07-2009, 03:23 PM   #3
matluv1
Not Yet Wild
 
matluv1's Avatar
E-Z-GO
 
Join Date: Nov 2008
Location: Northeast Ohio
Posts: 25
Default Re: 86 EZ GO problems

I put a thead up a couple days ago check it out.
matluv1 is offline   Reply With Quote
Old 02-08-2009, 07:24 AM   #4
jumbotron1
Not Yet Wild
 
jumbotron1's Avatar
E-Z-GO
 
Join Date: Jul 2008
Location: Gleason, WI
Posts: 14
Default Re: 86 EZ GO problems

Pretty sure i found the problem...the pulsar coil checked out at .14 ohms. Once I get a new pulsar coil and get her back together I'll let everyone know how it went.
jumbotron1 is offline   Reply With Quote
Old 02-15-2009, 04:52 PM   #5
jumbotron1
Not Yet Wild
 
jumbotron1's Avatar
E-Z-GO
 
Join Date: Jul 2008
Location: Gleason, WI
Posts: 14
Default Re: 86 EZ GO problems

Replaced the pulsar coil today, and she fired right up!!! Thanks everyone for your help!!!
jumbotron1 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
problems Gas EZGO
The New Guy With Problems Gas Club Car
Par Car problems Gas Columbia ParCar
Dds Problems Electric EZGO


All times are GMT -5. The time now is 10:07 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.