lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-22-2015, 02:45 PM   #1
blizzrd
Gone Wild
 
blizzrd's Avatar
Yamaha
 
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
Default So I put the motor back in....

Should be PUT the motor back in...anyways.


Turn the key aaaand......nothing. Nothing at all. Got another battery and nothing. I'm at my wits end with this thing. I don't think I forgot anything but hell who knows. Any ideas where to start?
blizzrd is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-22-2015, 05:17 PM   #2
smokindawg
Gone Wild
 
smokindawg's Avatar
Yamaha
 
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
Default re: So I put the motor back in....

What motor, what cart, swap anything else?
smokindawg is offline   Reply With Quote
Old 12-22-2015, 05:38 PM   #3
blizzrd
Gone Wild
 
blizzrd's Avatar
Yamaha
 
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
Default re: So I put the motor back in....

G1. Nope. Connected everything I could think of. It's just giving me nothing at all. I'm thinking of using some die electric grease and reseat the plugs from the coil plate.
blizzrd is offline   Reply With Quote
Old 12-22-2015, 07:00 PM   #4
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
Default re: So I put the motor back in....

Does it turn over? Or does it not "fire up"?
smallblock450sl is offline   Reply With Quote
Old 12-22-2015, 07:26 PM   #5
blizzrd
Gone Wild
 
blizzrd's Avatar
Yamaha
 
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
Default re: So I put the motor back in....

No turning over
blizzrd is offline   Reply With Quote
Old 12-22-2015, 07:52 PM   #6
raydhd
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
Default re: So I put the motor back in....

Jack it up and jump the solenoid. If it doesn't work that way started,battery or cables.If it does start retracing back to ignition switch including the solenoid itself.I don't know about the G1 start stop switch is but it is often the problem on later yamahas.But check your battery cables first.I had corrosion in my negative battery cable that I finally found after checking everything else.
raydhd is offline   Reply With Quote
Old 12-22-2015, 07:55 PM   #7
blizzrd
Gone Wild
 
blizzrd's Avatar
Yamaha
 
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
Default re: So I put the motor back in....

Something must be loose or not connected cuz it was fine before I took it apart to do the seals. The only thing I can think of is that I left it open and it rained really bad one night. I wasn't home so I couldn't cover it. Not sure if that would have messed anything up.
blizzrd is offline   Reply With Quote
Old 12-22-2015, 08:40 PM   #8
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
Default re: So I put the motor back in....

First, I would check the "red wire lead" from the positive battery cable to the wire harness. If correded or broken...the car is dead. Second, I would check the positive and negative fuses and the fuse holder it self for continuity. Don't be descouraged, I know you have had some issues, but we all can work this out...I hope
smallblock450sl is offline   Reply With Quote
Old 12-22-2015, 09:25 PM   #9
blizzrd
Gone Wild
 
blizzrd's Avatar
Yamaha
 
Join Date: Sep 2015
Location: San Antonio, TX
Posts: 260
Default re: So I put the motor back in....

Where are the fuses? Oh and thank you very much.
blizzrd is offline   Reply With Quote
Old 12-22-2015, 09:33 PM   #10
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
Default re: So I put the motor back in....

Useually on G1's, the positive fuse will be below the solenoids and the negative fuse will be behind the solenoids. Don't thank me till we get this puppy running.
smallblock450sl is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Got my motor back from PQ Electric Club Car
pq motor is back and in !!! Electric EZGO
Putting the two halves of the motor back together Gas EZGO
1988 Parcar..I'm back..with useless motor. Gas Columbia ParCar
G1 Motor-what are these on the back of the block Gas Yamaha


All times are GMT -5. The time now is 02:01 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.