lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-25-2015, 09:20 AM   #1
seasidepcb
Getting Wild
Club Car
 
Join Date: Jul 2011
Location: DECATURVILLE, TN.
Posts: 80
Default 1995 ez go series won't move

WE HAVE A 1995 EZ GO 36 VOLT CAR THAT WON'T RUN.

PUT ON A NEW CONTROLLER, F & R ASSEMBLY, TESTED THE THROTTLE POSITION SENSOR, DISCHARGED BATTERY PACK WHICH IS OKAY AND STILL NOT RUNNING. NEED HELP.

THANKS,

ROY
seasidepcb is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-25-2015, 09:48 AM   #2
radioman
Gone Wild
E-Z-GO
 
Join Date: Jan 2014
Location: South Georgia
Posts: 994
Default Re: 1995 ez go series won't move

Does the solenoid click when you press the pedal?
radioman is offline   Reply With Quote
Old 09-25-2015, 10:20 AM   #3
seasidepcb
Getting Wild
Club Car
 
Join Date: Jul 2011
Location: DECATURVILLE, TN.
Posts: 80
Default Re: 1995 ez go series won't move

yes
seasidepcb is offline   Reply With Quote
Old 09-25-2015, 11:03 AM   #4
radioman
Gone Wild
E-Z-GO
 
Join Date: Jan 2014
Location: South Georgia
Posts: 994
Default Re: 1995 ez go series won't move

Make sure battery + voltage is getting through the big terminals on the solenoid when the pedal is depressed. Secure the cart from sudden unexpected movement while probing around. Others here are more help than me but they will want this information to help you troubleshoot. Why did you replace all these parts? Was the cart not running before?
radioman is offline   Reply With Quote
Old 09-25-2015, 11:24 AM   #5
seasidepcb
Getting Wild
Club Car
 
Join Date: Jul 2011
Location: DECATURVILLE, TN.
Posts: 80
Default Re: 1995 ez go series won't move

THANKS. CUSTOMER SAID HE CHANGED OUT SOLENOID. NO READING OFF SOLENOID TEST. WILL INSTALL NEW SOLENOID.

HIS CONTROLLER WAS BAD SO WE REPLACED IT AND THE F&R SWITHCH WAS NOT MAKING CONTACT.

WE WILL LET YOU KNOW WHEN WE GET THE NEW SOLENOID ON.

THANKS AGAIN,

ROY
seasidepcb is offline   Reply With Quote
Old 09-25-2015, 12:42 PM   #6
radioman
Gone Wild
E-Z-GO
 
Join Date: Jan 2014
Location: South Georgia
Posts: 994
Default Re: 1995 ez go series won't move

Quote:
Originally Posted by seasidepcb View Post
THANKS. CUSTOMER SAID HE CHANGED OUT SOLENOID. NO READING OFF SOLENOID TEST. WILL INSTALL NEW SOLENOID.

HIS CONTROLLER WAS BAD SO WE REPLACED IT AND THE F&R SWITHCH WAS NOT MAKING CONTACT.

WE WILL LET YOU KNOW WHEN WE GET THE NEW SOLENOID ON.

THANKS AGAIN,

ROY
Did both sides of solenoid big terminals have no voltage or just the output side? Is there a resistor across the big terminals and if so when the pedal is pressed what voltage appears on both sides. If the solenoid is new and properly installed another one may not fix problem.
radioman is offline   Reply With Quote
Old 09-25-2015, 01:00 PM   #7
seasidepcb
Getting Wild
Club Car
 
Join Date: Jul 2011
Location: DECATURVILLE, TN.
Posts: 80
Default Re: 1995 ez go series won't move

new solenoid did not help. jumped motor and will run in forward and arched in reverse.

do you think the motor is the issue?

thanks,

roy
seasidepcb is offline   Reply With Quote
Old 09-25-2015, 01:03 PM   #8
radioman
Gone Wild
E-Z-GO
 
Join Date: Jan 2014
Location: South Georgia
Posts: 994
Default Re: 1995 ez go series won't move

You are not answering my questions about the solenoid voltage across the large terminals. We need more information. You need to get someone else to help you. JohnnieB comes highly recommended.
radioman is offline   Reply With Quote
Old 09-25-2015, 01:13 PM   #9
seasidepcb
Getting Wild
Club Car
 
Join Date: Jul 2011
Location: DECATURVILLE, TN.
Posts: 80
Default Re: 1995 ez go series won't move

No voltage on either side of the solenoid.
Sorry i did not answer your questions earlier.

What do you think?

Thanks,

roy
seasidepcb is offline   Reply With Quote
Old 09-25-2015, 01:23 PM   #10
crash test dummy
Not Yet Wild
Club Car
 
Join Date: Nov 2011
Location: Z-HELLS FL
Posts: 0
Default Re: 1995 ez go series won't move

solenoid test
Quote:
Disconnect the negative battery cable from the battery. remove all wires, restorer , and diode from solenoid
test 1
Connect an volt meter, set on continuity, place on the two large terminal studs. The meter should indicate no continuity, Replace the solenoid if continuity is present.
test 2
Using jumper wires attach from main positive and main negative of battery pack to the two small solenoid studs, polarity is not important. You should hear a click as the solenoid engages, and the meter should indicate continuity on the two large terminals. Replace the solenoid if continuity is not present.
if solenoid clicks rapidly solenoid is bad
[/quote]
crash test dummy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
1995 Series EZGO Electric EZGO
1996 Series DS 48V won't move on ground, wheels barely move on jacks Electric Club Car
1995 Ez Go won't move Electric EZGO
1995 Club Car Electric Series Electric Club Car
1995 club car wont move Electric Club Car


All times are GMT -5. The time now is 07:45 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.