|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
07-05-2015, 09:10 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2015
Location: missouri
Posts: 3
|
1993 club car speed controller
Hope this is the right thread, my cart won't run but I think I have narrowed my problem down to the controller but I don't know how to test the controller with an ohmmeter. I don't have a solenoid click and not sure if the controller can cause that so maybe someone here can help me. Thanks
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-05-2015, 09:13 PM
|
#2 |
|
ΜΟΛΩΝ ΛΑΒΕ
 Join Date: Nov 2012
Location: West Virginia
Posts: 4,094
|
Re: 1993 club car speed controller
If you don't have a solenoid click then you can't determine the issue is the controller. Jack up the rear and CAREFULLY jump the solenoid (short the large posts) then turn on the key and hit the go pedal. If it runs, replace the solenoid and your problem will be fixed.
|
|
|
|
|
07-06-2015, 03:23 PM
|
#3 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 1993 club car speed controller
Following, waiting for test results.
|
|
|
|
|
07-06-2015, 09:00 PM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2015
Location: missouri
Posts: 3
|
Re: 1993 club car speed controller
Hi and thanks for responding; I finally got a solenoid click but still no run. I had a wire wrong on the FR shifter. I tried testing the motor but not sure how to see if the motor is good. Do you know how to test the motor to see if it will run without using the controller. Thanks
|
|
|
|
|
07-06-2015, 09:45 PM
|
#5 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 1993 club car speed controller
Unhook wires from motor. Do a continuity test between A1 and A2. Then again from F1 and F2. You should have it in both locations. If you dont, the motor won't run.
|
|
|
|
|
07-09-2015, 06:28 PM
|
#6 |
|
Not Yet Wild
Join Date: Jul 2015
Location: missouri
Posts: 3
|
Re: 1993 club car speed controller
Hi again, I got the motor to run by jumping the m- and b- terminals and pushing throttle. So,I now know it is not the motor.does this men that the controller is bad? Also if so where is the best place to buy a controller.
|
|
|
|
|
07-09-2015, 09:20 PM
|
#7 | |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 1993 club car speed controller
Quote:
|
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 96 club car speed controller | Golf Carts and Parts | |||
| 1993 Club Car DS Controller | Electric Club Car | |||
| 1993 Club Car DS needs more torque and speed?? | Electric Club Car | |||
| '00 Club Car - Possible speed controller issue? | Electric Club Car | |||
| Club Car XRT 810 Speed Controller | Electric Club Car | |||
Linear Mode
