|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
03-03-2016, 11:46 AM | #1 |
Not Yet Wild
Join Date: May 2014
Posts: 11
|
Ignition switch with ground to kill engine
Maybe my mind is filled up with too much knowledge, but I'm trying to figure out how my kill switch can shut off the engine when the key is turned to off. Mine does not appear to have a place for the engine ground. What kill switch do you recommend I purchase? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-03-2016, 11:58 AM | #2 |
Getting Wild
Join Date: Aug 2014
Location: Joliet, IL
Posts: 76
|
Re: Ignition switch with ground to kill engine
You should be able to use your switch and hook a 5 plug relay to ignition. hook kill to terminal 30 and ground to 87a. 12 volt ignition to 85 and ground to 86 or vise versa 12v to 86 and ground to 85
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1991 gas club car ignition/kill problems | Gas Club Car | |||
Want to install a Tow Switch/Kill Switch | Design Center | |||
94 G9A Ignition Coil Ground | Gas Yamaha | |||
Key switch & Kill switch question | Gas Club Car | |||
Tether to kill engine off key switch | Big Block Talk! |