|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
04-13-2016, 09:25 PM | #1 |
Not Yet Wild
Join Date: Apr 2016
Posts: 6
|
Got the 23 horse in have a few?
I got my cpp 23 in my 94 club car. Everything went great. Runs good. I ordered with the high Rev kit installed. I have one question though. My cart already had the stock governor taken out and I didn't have it. I got it all hooked up to the throttle linkage fine but when I give it some gas it doesn't always want to return good. It'll hang around 2500 rpms at idle it will keep idling up til it reaches close too. Any ideas? I'm going to try to bend the spring a little bit more on the cart side but it appears to be returning all the way. It's just one little blip it finishes coming back with help then starts going up again
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-14-2016, 07:30 AM | #2 |
Younger Than Dirt
Join Date: Aug 2007
Location: North Myrtle Beach SC
Posts: 2,047
|
Re: Got the 23 horse in have a few?
Put another or stronger spring on the throttle return
|
04-14-2016, 09:25 AM | #3 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Got the 23 horse in have a few?
What he said!
It could also be binding somewhere. Look at the linkage/cable setup on the engine when you press the throttle. Mine did that too, and it ended up being one of the springs was getting caught on a little bracket and hanging up. I also loosened up the throttle linkage on the engine so it didn't have any resistance. |
04-14-2016, 11:12 AM | #4 |
Not Yet Wild
Join Date: Apr 2016
Posts: 6
|
Re: Got the 23 horse in have a few?
Thanks. I was thinking last night before bed also was going to try to put some slack back into the pedal. I removed all of it when. It was pedal start on the original one. See if that helps also. All I'm running for throttle cable is from my black box straight to the linkage that looks to be working alright
|
04-14-2016, 01:28 PM | #5 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,045
|
Re: Got the 23 horse in have a few?
The stronger return spring needs to be on the engine (carb) not the pedal.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
3pg horse help | Gas EZGO | |||
Gift Horse | Electric EZGO | |||
increase horse power for 9 horse | Gas EZGO | |||
18 horse need help | Big Block Talk! |