|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
|
05-23-2015, 10:47 AM | #1 |
Not Yet Wild
Join Date: May 2015
Location: Chicago Suburbs
Posts: 42
|
What fuse needed for a 12v inverter?
I just bought a 48V CC. The previous owner wired up a 12V inverter with no fuse protection on the 48V side. Anytime I disconnect the power to the battery, I get a spark off the negative side (albeit A LOT smaller than when I wasn't thinking and disconnected the positive side ).
Is a fuse needed on the 48V side? To keep it from sparking everytime I touch the negative terminal, should a toggle switch of some sort be installed? |
05-23-2015, 11:22 AM | #2 |
Gone Wild
Join Date: Dec 2006
Posts: 679
|
Re: What fuse needed for a 12v inverter?
Hey Jabber82, you raised a few questions.
What wattage is this inverter rated for? Sparks when you disconnect is not a fuse issue but does raise another question. Is the inverter ON when you disconnect? |
05-23-2015, 01:35 PM | #3 |
Not Yet Wild
Join Date: May 2015
Location: Chicago Suburbs
Posts: 42
|
Re: What fuse needed for a 12v inverter?
Inverter is always on as I cannot see an on/off switch on it anywhere. He had it hard wired straight to the 48V battery array. I have no clue on the wattage, it came with that cart. I haven't taken it off to check for a brand.
I am thinking that some sort of fuse will not work as they are designed for a 12V system. Possibly a toggle switch to shut off the positive side? |
05-23-2015, 01:38 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: What fuse needed for a 12v inverter?
These units draw a small amount of power constantly so they should be wired to a 48v relay like you find in a 48v CC charger if they are not a unit designed with a keyswitch or toggle type on/off.
|
05-23-2015, 01:54 PM | #5 |
Not Yet Wild
Join Date: May 2015
Location: Chicago Suburbs
Posts: 42
|
Re: What fuse needed for a 12v inverter?
Thanks Scotty. I watched a video and it shows that there will always be a small spark while the internal capacitor gets its initial charge. But who knows as the guy hooked up the negative then positive side.
|
05-23-2015, 03:57 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: What fuse needed for a 12v inverter?
right as long as it is on... not when it is switched. The spark is telling you that it is drawing power ... as in right now as we sit here, drawing power... hence the need for either an internal or external relay or appropriate switch.
|
05-23-2015, 10:04 PM | #7 |
Gone Wild
Join Date: Dec 2006
Posts: 679
|
Re: What fuse needed for a 12v inverter?
Ah, this is a 48 volt to 12 volt DC to DC converter for accessories. I was thinking it was a DC to AC inverter. I would do what Scottyb recommends, the CC solenoid will be more than enough to handle the amperage of this converter and can be hooked up to the cart's 48 volt system. Control the solenoid by a switch or the key.
If you leave if hooked up and store your cart you will come back to dead batteries. |
05-25-2015, 10:09 AM | #8 |
Not Yet Wild
Join Date: May 2015
Location: Chicago Suburbs
Posts: 42
|
Re: What fuse needed for a 12v inverter?
Makes a ton of sense guys. The previous owner has created a rats nest of wiring and has all the accessories powered by the headlight switch rather than the key.
Since I just got approval from the wife about adding in a stereo (which will require a new dashboard of course), I think I am just going to redo all the wiring and make it off the key switch and add in rockers for added future ability. Scotty, do you have a relay you would recommend (being a seller here?) |
05-25-2015, 10:22 AM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: What fuse needed for a 12v inverter?
I recommend you purchase the start relay for a club car charger. We do not sell these, they are an OEM part.
We sell a DC reducer with a built-in relay and a key switch activation wire. Thank you for asking |
05-26-2015, 10:22 PM | #10 | |
Gone Wild
Join Date: Dec 2006
Posts: 679
|
Re: What fuse needed for a 12v inverter?
Quote:
You are correct, you would not need a solenoid rated for 400 amps or even 200 amps continuous but if you get a good price on one you probably won't ever change it out again! Lol And it would operate at pack voltage. Even a used one would work at these lighter loads for a long time. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
LED Wiring, Inverter needed? | Electric EZGO | |||
Aftermarket DC Inverter | Electric EZGO | |||
48 volt inverter installation | Electric EZGO | |||
To install a INVERTER | Gas Yamaha | |||
36vdc TO 12vdc inverter | Electric EZGO |