lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-24-2009, 06:57 AM   #1
sauerflash
Not Yet Wild
 
Join Date: May 2009
Posts: 25
Default Wire fell off v glide arm

My 89 clubcar is working great, but stopped dead in water.. Took v-glide side covere off, and discovered wire to the arm fell off...Whats the proper way to fix that, sotter it?
sauerflash is offline   Reply With Quote
Old 05-24-2009, 07:42 AM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Wire fell off v glide arm

You can try that ..... a new one is less then $15 OEM #1013860
scottyb is online now   Reply With Quote
Old 05-24-2009, 08:13 AM   #3
sauerflash
Not Yet Wild
 
Join Date: May 2009
Posts: 25
Default Re: Wire fell off v glide arm

okay,thanks... Its a brand new v-glide, is that a common failure?
sauerflash is offline   Reply With Quote
Old 05-24-2009, 08:23 AM   #4
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Wire fell off v glide arm

Not at all ..... most last over 15 years?
scottyb is online now   Reply With Quote
Old 05-24-2009, 09:03 AM   #5
sauerflash
Not Yet Wild
 
Join Date: May 2009
Posts: 25
Default Re: Wire fell off v glide arm

Im messing with it now..It looks like the copper wire just fell out of the hole on the copper contact of the arm for whatever reason... I cant really fenagle it in yet, but I am trying!
sauerflash is offline   Reply With Quote
Old 05-25-2009, 07:05 AM   #6
sauerflash
Not Yet Wild
 
Join Date: May 2009
Posts: 25
Default Re: Wire fell off v glide arm

Scotty, Where do you guys buy your parts? I need some advice.. Don't some of you guys sell parts? I got the cart running... Except, I didn't put the heat wrap on the copper wire that goes to the v-glide arm at first. So I after i saw that it fixed the problem, i went to take the wire back out to put the heat wrap on, and the freagin wire wont come out of arm!!! Duuuuur! Thats how things roll for me!! i am afraid the unwrapped wire will melt the arm eventually... What do you think? I think i should get spare arm.
sauerflash is offline   Reply With Quote
Old 05-25-2009, 08:17 AM   #7
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Wire fell off v glide arm

I think it needs some kinda wrap to insulate against shorting out ... I would try getting something on it even if it it just a piece of duct tape, then I would order a new one from one of our sponsors. You can access them all from the site sponsor link in the blue bar above. It is on every page
scottyb is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2001 Cc V-glide Electric Club Car
Melted V-glide Electric Club Car
V Glide Performance? Electric Club Car
Help I Fell & Cant Start. Gas golf carts
V-glide question Electric Club Car


All times are GMT -5. The time now is 04:31 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.