|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
02-20-2021, 04:37 PM | #1521 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Programming Curtis Controller
Quote:
That is why you would want to buy one that is already pre-programmed for an E-Z-GO or similar Textron EV. Not one for a lithium cart either. It requires a BMS to interface and communicate with to keep it functional. And you'll need a compatible harness, available from Textron. It needs to be configured for everything required for your vehicle to operate. Look for a 1236-6406, 1236-6416, 1236-6333, or a 1234-6350. There are other model numbers, but you would likely not want one of those. Too far away from what you are needing... |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-20-2021, 06:07 PM | #1522 |
Not Yet Wild
Join Date: Jul 2020
Posts: 43
|
Re: Programming Curtis Controller
10-4,
|
02-21-2021, 12:08 PM | #1523 |
Not Yet Wild
Join Date: Jan 2021
Posts: 7
|
Re: Programming Curtis Controller
I have the spec sheet attached of my Curtis controller. Can anyone tell me what parameters I can changed to speed my cart up. Have an OEM level programer that will change the settings.
|
03-09-2021, 06:35 PM | #1524 |
Not Yet Wild
Join Date: Jul 2020
Posts: 43
|
Re: Programming Curtis Controller
hi Guys, we finally got some decent weather, snow almost all melted.
Decided it would be a good time to see if i could program a speed increase from 19mph to 25mph. Adjusted a few of the current parameter, stepped on the throttle AND..... it barely moved . I was now going 1 -2 mph...hahah. fortunatly I had my original spreadsheet and away I went 19mph lol can i get a bit of info on how parameters effect power to the motor? My original spredsheet is a couple post back...thanks?? |
03-10-2021, 12:38 AM | #1525 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Programming Curtis Controller
Quote:
We now have a bioweaponized Ebola outbreak in the US. Patient zero arrived in PA. First thing they did was silence all involved in the discovery... |
|
03-10-2021, 08:56 PM | #1526 |
Not Yet Wild
Join Date: Jul 2020
Posts: 43
|
Re: Programming Curtis Controller
as if it wasn't bad enough...another deliberate illness
|
03-11-2021, 10:35 PM | #1527 |
Not Yet Wild
Join Date: Jul 2020
Posts: 43
|
Re: Programming Curtis Controller
Im not having any luck searching for the L6 motor,
Any thoughts on this from china |
03-17-2021, 12:44 PM | #1528 | |
Not Yet Wild
Join Date: May 2016
Posts: 1
|
Re: Programming Curtis Controller
Quote:
I have two 1230-2402 controllers that have error 5.3 (controller failure). I read on the forums that only resetting to factory settings in developer mode will help. Please tell me how to enable the program in developer mode? |
|
03-17-2021, 02:04 PM | #1529 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Programming Curtis Controller
Quote:
BTW, any level interface can be used to reflash a controller, IF you have the file to reflash it with. Those files are just not available to anyone that does not have an account with Curtis to access those files. |
|
03-23-2021, 06:14 PM | #1530 |
Not Yet Wild
Join Date: Mar 2016
Posts: 12
|
Re: Programming Curtis Controller
Okay guys, I've got a fun one. I've been using mine successfully for a long while now, no issues at all. I swapped computers to run a mini pc for data logging on my motorcycle (curtis 1238 and AC35), and now I can't get it to connect on either machine, old or new. I reinstalled software, have the correct access level set, redid the FTDI adapter settings, nothing. Software recognizes the adapter correctly, but I can't connect to the controller, with a no system found error.
Any ideas? Oh, I should note that I tried the Spyglass and it is working without issue, so I don't think it is on the controller-end. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
curtis 1206sx controller | Electric EZGO | |||
WTB used curtis 1204 controller | Golf Carts and Parts | |||
wanted curtis pmc controller | Golf Carts and Parts | |||
troubleshooting curtis controller | Electric EZGO | |||
wanted: curtis pmc controller | Golf Carts and Parts |