|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-14-2019, 07:47 AM | #1 |
Gone Wild
Join Date: Apr 2019
Location: North Alabama
Posts: 165
|
SR48500 Alltrax questions for series
I put 6 new US 8VGC XC2 in it yesterday. Yes it is a series cart with the alltrax sr48500 controller and super duty F/R and the 400 amp solenoid. Don't think that I have every thing correct with the controller yet.
Is it normal that you can only monitor the gauges in the alltrax program when the solenoid is engaged? that's when mine shows on the computer. Also, it isn't seeing the reverse signal, forward speed setting changes the forward and reverse speed equally. I can leave the reverse speed set to 0 and still go 100% speed in reverse. Just not sure what wires I have crossed up or wired wrong. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2019, 04:21 PM | #2 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: SR48500 Alltrax questions for series
Here is how I wired my series cart with the SR48500 controller and reversing contactor. Also, look at the diagram, did you hook up a wire from you fwd/rev switch (reverse side) to the Blue-reverse terminal on the controller. This will tell the controller to operate in half speed when in reverse.
|
05-14-2019, 07:06 PM | #3 |
Gone Wild
Join Date: Apr 2019
Location: North Alabama
Posts: 165
|
Re: SR48500 Alltrax questions for series
Thanks for the reply, after looking at the book again that came with it and looking at what I had done earlier, I had made some mistakes and finaly had that Ah Ha moment where everything just clicked. The wiring on this cart lookes like everyone that has owned it before me tied into the wires and add their own stuff.
The controller is coming on with the key now, not the solenoid. and the reverse tab is kicking in when in reverse so the controller is doing as I would expect it to. So now to get with Scotty and find out which motor will be best for me. Thank you for your help. |
05-14-2019, 08:14 PM | #4 | |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: SR48500 Alltrax questions for series
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Adding Alltrax SR48500 To 2000 DS 36V Series Cart | Electric Club Car | |||
Alltrax SR48500 setup | Electric EZGO | |||
Alltrax SR48500 Settings | Electric Club Car | |||
Alltrax SR48500 no power | Electric EZGO | |||
Alltrax SR48500 Detune to 300? | Electric EZGO |