ZONGSHEN 625CC engine

leschilli67 · 12-28-2017, 01:03 PM

Quote:

Originally Posted by David Maner

http://www.zongshenpower.com/upload/...4/PH13500E.pdf

here is a link to a manual for a generator that uses the 625cc engine that Vegas Carts is selling. Its mostly a users manual for the generator but it contains some helpful information on this mystery engine.

It has a Low oil sensor

It holds 1.4 liter oil which is 49.27305 oz

Hope to one day put this engine in my CC DS in place of the 460 I have in it now.

Its taken me hours to find any information on this engine. It was tough but I persisted :-)

Thanks for finding this, some good info in here!

Sent from my iPhone using Tapatalk

leschilli67 · 12-28-2017, 01:07 PM

On another note, it’s a cool 16 here in Southern Ohio today, we are staying at the cabins at our campground this weekend with 3 other families we camp with, anyhow I tried my ezgo txt and it fired right up, may have to bring it along this weekend, Happy New Years!

Sent from my iPhone using Tapatalk

BrutalSoldier · 12-28-2017, 02:18 PM

follow

raydhd · 12-28-2017, 02:36 PM

We still don't know if VC's set up still uses the low oil sensor or not. It may not be wired in.

big mule · 12-28-2017, 02:58 PM

Quote:

Originally Posted by raydhd

We still don't know if VC's set up still uses the low oil sensor or not. It may not be wired in.

Here you go.....>

VC 625 oil sensor.jpg

raydhd · 12-28-2017, 03:17 PM

So is it normally open or closed ?

Rooster59 · 12-28-2017, 03:36 PM

While prepping for the upcoming install I asked about oil pressure light. I was told it is an oil shutdown system, not a warning light system. I assumed it would be operable but can't be certain.

leschilli67 · 12-28-2017, 04:30 PM

Mine is wired in and they pretty much confirmed that’s what the wiring harness on the 625 is.
Now to level my motor, I believe I am going to raise the rear of the motor mounting plate by using flat washers, I feel better that way rather than stacking washers under the motor it self. Any feedback is appreciated

Sent from my iPhone using Tapatalk

Rooster59 · 12-28-2017, 04:41 PM

If your mounting plate is like mine, thick billet aluminum, I would use the spacers under the plate and mount the engine solidly to a flat, firm surface. Much better for that aluminum casting to keep its bottom firmly planted.

leschilli67 · 12-28-2017, 04:45 PM

My thoughts exactly, I could see a motor mount snapping under stress which would result in a grown man crying...lol

Sent from my iPhone using Tapatalk

12-28-2017, 01:07 PM	#12
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134	Re: ZONGSHEN 625CC engine On another note, it’s a cool 16 here in Southern Ohio today, we are staying at the cabins at our campground this weekend with 3 other families we camp with, anyhow I tried my ezgo txt and it fired right up, may have to bring it along this weekend, Happy New Years! Sent from my iPhone using Tapatalk
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134

12-28-2017, 02:18 PM	#13
BrutalSoldier Addictive Personality Join Date: Jun 2017 Location: Rio Linda, Ca. Posts: 1,289	Re: ZONGSHEN 625CC engine follow

12-28-2017, 02:36 PM	#14
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: ZONGSHEN 625CC engine We still don't know if VC's set up still uses the low oil sensor or not. It may not be wired in.

12-28-2017, 03:17 PM	#16
raydhd VC 460 CLONE GONE WILD Join Date: Oct 2014 Location: Ray BY The Bay NJ Posts: 10,633	Re: ZONGSHEN 625CC engine So is it normally open or closed ?

12-28-2017, 03:36 PM	#17
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: ZONGSHEN 625CC engine While prepping for the upcoming install I asked about oil pressure light. I was told it is an oil shutdown system, not a warning light system. I assumed it would be operable but can't be certain.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-28-2017, 04:30 PM	#18
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134	Re: ZONGSHEN 625CC engine Mine is wired in and they pretty much confirmed that’s what the wiring harness on the 625 is. Now to level my motor, I believe I am going to raise the rear of the motor mounting plate by using flat washers, I feel better that way rather than stacking washers under the motor it self. Any feedback is appreciated Sent from my iPhone using Tapatalk
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134

12-28-2017, 04:41 PM	#19
Rooster59 Gone Wild Join Date: Jul 2017 Location: East Central Missouri Posts: 1,955	Re: ZONGSHEN 625CC engine If your mounting plate is like mine, thick billet aluminum, I would use the spacers under the plate and mount the engine solidly to a flat, firm surface. Much better for that aluminum casting to keep its bottom firmly planted.

12-28-2017, 04:45 PM	#20
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134	Re: ZONGSHEN 625CC engine My thoughts exactly, I could see a motor mount snapping under stress which would result in a grown man crying...lol Sent from my iPhone using Tapatalk
leschilli67 Getting Wild Join Date: Apr 2017 Posts: 134

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
VC 625cc kit for a 2004 club car DS	Big Block Talk!
Vegas Carts 625cc to a 87 G2	Clone Engine Swaps
2007 st 350 blown engine, rebuild or new Predator engine?	Gas EZGO
Engine and Wireing Diagram Robin Engine Model # EC253PG	Gas EZGO
Amsoil Synthetic engine oil or Royal Purple engine oil	Big Block Talk!