|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-26-2022, 11:59 PM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 3
|
Club Car XRT 4x4 axle override switch
I have a 2013 Club Car XRT 1550SE with Intellitrak... Question, can you run 12v right to the front axle coil to engage the 4x4 and make it a "on demand" system? wondering if anybody has performed this override, plowing on ice the Intellitrak is not very intelligent...
Thanks in advance for your help, Got Wood |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-27-2022, 07:14 AM | #2 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Club Car XRT 4x4 axle override switch
Have you tested the circuit to determine the actual voltage that it's supplying to the coil?
Sounds doable but I have some coils on equipment that say 12V but actually energize way under that. Also if you do it, remove the feed wire from the Intellitrak so you don't back feed the system from your switch. |
01-27-2022, 06:45 PM | #3 |
Not Yet Wild
Join Date: Nov 2011
Posts: 3
|
Re: Club Car XRT 4x4 axle override switch
Thanks Crash,
I ran a voltage meter in-line on the wires going to the axle and drove it where I know the axle engaged and "no voltage", even tried millivolts with nothing showing... I'm more confused then ever as to how the axle engages with Intillitrak, looking at all Club Car's manuals/exploded part view's etc. and it doesn't show how the front clutch engages I.E. coil/actuator ... My problem is plowing on ice the system can't sense slippage and engages the front axle to late and it sits there and spins because of the snow load on the front, would be nice to lock it out when needed... |
02-28-2022, 04:07 PM | #4 |
Not Yet Wild
Join Date: Nov 2011
Posts: 3
|
Re: Club Car XRT 4x4 axle override switch
Problem solved,
to engage the 4x4 on demand it is just as simple as supplying 12v to the axle, just disconnect the wires coming from the from the Itellitach to the axle and on the axle side wire, install a switch that sends 12v to one side and ground the other side to energize the axle coil on demand... Now my XRT is a plowing beast, no more waiting for the 4X4 to engage, flick the switch and GOOOO!! Awesome... |
|
|
Similar Threads | ||||
Thread | Forum | |||
RXV brake override | Electric EZGO | |||
1982 ds club car rear axle swap to 1990 axle | Electric Club Car | |||
Curtis Controller Override | Electric EZGO | |||
How to override CC governor?????? | Electric Club Car | |||
Override (Disable) OBC Drive Lockout | Electric Club Car |