|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-25-2021, 04:31 PM | #1 |
Not Yet Wild
Join Date: Nov 2018
Posts: 15
|
Curtis 1515 conversion
Just changed out my old fried controller for a curtis 1515 in my old 98 club car. All went well apart from the throttle is backwards! Full throttle is slowest and throttle just past the microswitch is full throttle. Curently running a v glide throttle and I dont want to do a mcor conversion as its a budget build. Anyone successfully converter a v glide to 5k-0?
Sent from my SM-G973F using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-25-2021, 10:38 PM | #2 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,682
|
Re: Curtis 1515 conversion
If you take the v glide apart there should be resistors going between all the different sets of contacts. I’d think you can reverse the order of those resistors and get what you need
|
12-26-2021, 04:20 PM | #3 |
Not Yet Wild
Join Date: Nov 2018
Posts: 15
|
Re: Curtis 1515 conversion
All good I got it sorted I must have had the high and low wires backwards!
Just need to wire up the speed sensor now so it goes faster than 10kmh! Sent from my SM-G973F using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone have Curtis 1515 controller pinout | Electric Club Car | |||
Curtis 1515 5201 and solenoid | Golf Carts and Parts | |||
Curtis Controller 1515-5201 | Golf Carts and Parts | |||
curtis controller 1515-5201 | Golf Carts and Parts | |||
Curtis 1515 / ERIC system | Electric Club Car |