|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-27-2018, 07:45 PM | #1 |
Not Yet Wild
Join Date: Nov 2018
Location: Coeur d'Alene, Idaho
Posts: 14
|
Fuse for Alltrax Question
Anyone have a pic of where the fuse is installed that is sent with the alltrax controller?
Ive got the XCT400 in a 2012 precedent iq excel. Installed new controller and solenoid - cart runs great. Apparently its smart to have the fuse in there for warranty of the controller etc. Thanks everyone!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-27-2018, 08:13 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Fuse for Alltrax Question
Bolt the fuse to the main positive battery terminal. Bolt the wire that would go on that terminal to the opposite end of the fuse.
|
11-28-2018, 02:06 PM | #3 |
Not Yet Wild
Join Date: Nov 2018
Location: Coeur d'Alene, Idaho
Posts: 14
|
Re: Fuse for Alltrax Question
|
11-28-2018, 02:08 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Fuse for Alltrax Question
Alltrax says to put the fuse anywhere - they mean anywhere even in between 2 batteries. So long as it is in the system it will function as designed.
I like it on the controller B- or the Solenoid B+. These locations tend to corrode a lot less than the battery posts |
11-28-2018, 08:32 PM | #5 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Fuse for Alltrax Question
I like the holder type so I can mount it out the way and securely install the fuse between the pack and solenoid. Mine has a clear cover but this one is similar...
https://www.amazon.com/Bussmann-SFR-...NN+fuse+holder |
03-01-2019, 01:16 PM | #6 |
Not Yet Wild
Join Date: Feb 2019
Posts: 28
|
Re: Fuse for Alltrax Question
Any particular way to bolt the fuse to a cable?
|
03-01-2019, 01:33 PM | #7 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Fuse for Alltrax Question
If you are going directly to a battery post, then not really. Just make sure it is secured and out of the way of anything that may hit it.
|
03-01-2019, 03:19 PM | #8 | |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Fuse for Alltrax Question
Quote:
https://www.buggiesunlimited.com/gol...sal-fit)/30917 |
|
03-01-2019, 06:59 PM | #9 |
Gone Wild
Join Date: Feb 2015
Location: Quad cities
Posts: 334
|
Re: Fuse for Alltrax Question
I wouldn’t mount it on a battery terminal vibration will make it weak losing voltage bad idea we have skyjack scissor lifts they mount the fuse between two batteries I bet I have changed 50 of them since they cheap it out not using a fuse holder
|
03-01-2019, 07:19 PM | #10 | |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Fuse for Alltrax Question
Quote:
Especially since Alltrax shows it in their installation manual..... |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
New Alltrax Xct 300 in 08 precedent blowing 15a fuse | Electric Club Car | |||
Alltrax DCX400 PDS Motor Controller EZ-GO PDS DCX 400 with Solonoid & Fuse | Golf Carts and Parts | |||
G2 Fuse Question | Gas Yamaha | |||
alltrax buss fuse | Golf Carts and Parts | |||
Alltrax Fuse PICTURE ComparisonmCNN250 and ANN400 | Electric Club Car |