Alltrax SR48500 Detune to 300?

[nosaj2]

Hey guys, I just ordered a SR48500 for my 2003 EZGO TXT 36volt. I eventually want to upgrade everything to take advantage of the 500amp and maybe upgrade to 48v. But right now I just want to limit my 6yr old to about half speed. I hope I read correctly. This controller will do that correct? Also, until I can upgrade everything, can I just detune the controller to about 300 amp and keep from burning up my original FRN, and solenoids?

[mgray70]

If you ordered the optional shift on the fly option it will be just a matter of turning a dial, but it does not come with it.

Sent from my SM-G930R4 using Tapatalk

[scottyb]

Yes you can turn down the max flow as low as you like.
The original was 275 amps but, that is not a guarantee the F&R won't fry I used to see that happen with stock controls when people had cargo boxes and hills.

You can also experiment with a mode 2 speed limit and activate it with a switch. All that's needed is a 36v (+) supply and a 15 amp toggle switch

In this second mode you can reduce top speed and acceleration rate - I hid my switch under the seat- now I have a 2 pole key switch so I can lock it in either mode.

See my thread "Fun with Alltrax" where I activated mode 2 in reverse only for my hotrod.
http://www.buggiesgonewild.com/elect...n-alltrax.html

[nosaj2]

scottyb,
That is exactly what I wanted to do. Low Speed for my kids and have a keyed switch to unlock full speed. Although I'm not exactly sure I follow your wiring description. Maybe it will be more clear once I get into the Alltrax software and wiring instructions.

[scottyb]

The install diagram in the owner's manual shows what I'm talking about.

[nosaj2]

Perfect! Thanks for you help!