|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-28-2019, 03:37 PM | #1 |
Getting Wild
Join Date: Jun 2018
Posts: 117
|
Alltrax 500 install- 400 amp fuse
Does the 400 amp fuse go to the battery main or negative??? Sheet diagram says positive, Alltrax website says negative... I assume the positive is the correct orientation. Is this correct? Thanks!!!
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-28-2019, 04:08 PM | #2 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Re: Alltrax 500 install- 400 amp fuse
Main pack positive.
|
04-28-2019, 04:39 PM | #3 |
Getting Wild
Join Date: Jun 2018
Posts: 117
|
Alltrax 500 install- 400 amp fuse
Thank you! Now I gotta go get some insulated wrenches because it’s spark city trying to get this positive hooked up with the fuse lol
Sent from my iPhone using Tapatalk |
04-28-2019, 05:52 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax 500 install- 400 amp fuse
Something is wrong
That's not sparking - that's welding |
04-28-2019, 06:40 PM | #5 |
Getting Wild
Join Date: Jun 2018
Posts: 117
|
Alltrax 500 install- 400 amp fuse
|
04-28-2019, 08:29 PM | #6 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Alltrax 500 install- 400 amp fuse
Disconnect the pack and terminate the Main Pack Negative last. Before you do, get you an incandescent bulb and place it on the post and then place the cable against the thread of the bulb. Wait till the bulb goes dim or out and then quickly attach the cable.
And that is a heavy draw somewhere to pull that kind of current..... |
04-28-2019, 10:10 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax 500 install- 400 amp fuse
Regardless. Something is wrong. There is a dead short there for that kind of metal damage. So go back and check you high amperage cable routes. All 10 or 13 depending upon the system type. Don't make any final connection until you find out why you have such a dead short.
|
04-28-2019, 10:26 PM | #8 | |
Getting Wild
Join Date: Jun 2018
Posts: 117
|
Re: Alltrax 500 install- 400 amp fuse
Quote:
Thank you- I will go back and check all cables on controller and solenoid....may have more questions tomorrow. Thanks guys. Sent from my iPhone using Tapatalk |
|
04-29-2019, 03:23 PM | #9 |
Getting Wild
Join Date: Jun 2018
Posts: 117
|
Re: Alltrax 500 install- 400 amp fuse
well I’ve checked all my connection from controller, to motor to solenoid for my high amp cables. Everything appears to be wired to the correct location. I have posted a picture of my solenoid...do I have the washers on wrong? Should it be washer on bottom, terminal connector (red wire from original solenoid positive and diode) then crush washer?
Sent from my iPhone using Tapatalk |
04-29-2019, 03:44 PM | #10 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax 500 install- 400 amp fuse
You should definitely see no light or even feel heat from the light bulb trick above or you have an issue.
I cannot see what is connected to the Solenoid small posts to verify it is wired correctly, is it missing the flyback diode or the connecting wiring themselves? |
|
|
Similar Threads | ||||
Thread | Forum | |||
12V fuse panel, where to install? | Electric Club Car | |||
Fuse for Alltrax Question | Electric Club Car | |||
New Alltrax Xct 300 in 08 precedent blowing 15a fuse | Electric Club Car | |||
alltrax buss fuse | Golf Carts and Parts | |||
fuse block install | Electric EZGO |