48 v TXT will not Move, Lights and Beeper work

[chund15]

Hello,
My 2011 48 volt TXT will not move forward or backwards after pressing the accelerator. The charger says fully charged and the lights are shining brightly but when I press the pedal nothing happens: not a click, or a moan, or a jerk. Absolutely nothing.
I did run out of power 2 weekends ago and realized my charger had a charger fault code blinking. Afterwards I borrowed a friend's exact same EZGO powerwise QE charger and the cart charged and ran fine. So I returned his charger and bought a new charger from the "dealer" this weekend. It is a Pro-Fit charger. PF11595
After hooking up this charger and allowing it to charge overnight, the cart will not budge but it is saying full power and the lights and reverse beeper work.
Any suggestions would be helpful. Otherwise I'll have to have the dealer come pick it up next week.
Thank You!

[mutant]

do you have a meter to read voltage? we need pack voltage-those meters are untrustworthy...
no solenoid click means after pack voltage is determined you need to see if that circuit is activating...