48v Club Car, solenoid clicks, won't run...

TahoeDawgZ71 · 02-03-2017, 04:23 PM

Quote:

Originally Posted by Tractor9n

What is the up side to go with this controller, price, performance? Is everything the same mounting wise other than the mounting holes? Thank....

The XCT300 will give you much quicker acceleration, a boost in torque, and a boost in speed. Once you mount the controller you may need to replace a few wires due to length issues. Most people order new cable sets with the XCT controllers and don't have to worry about this problem. A 4 gauge cable set would be a good investment, but it's not required.

Tractor9n · 02-03-2017, 06:25 PM

Thanks....

Tractor9n · 02-06-2017, 12:00 PM

Can anyone tell me what the ohm value of club car motor should be, between A1 & A2 and F1 & F2? Windings show very little ohms, I know they call it a shunted motor, but the ohn values are only like 4 ohm between A1 & A2. Any idea's?

Sergio · 02-06-2017, 12:26 PM

Normally You just test for continuity (no continuity=bad motor) as most folks will not have the proper equipment needed to measure the low resistance values.

For a typical ADC Sepex motor found on a Precedent (@75°F):

Armature: 0.012Ω
Field: 1.75Ω

Tractor9n · 02-06-2017, 01:06 PM

I have low ohm resistance, will check again against your post. Can you jump the motor directly from the batteries to try the motor itself?

Tractor9n · 02-17-2017, 04:53 PM

Did some more research and finally ordered the Alltrax ACT48300 controller, solenoid/diode and WOW, did that do the trick, it really runs now, was holding my breath that I spent that kind of $ and it didn't work...

tag50 · 02-17-2017, 07:00 PM

What? You doubted "The 3 Wise Men" of BGW? Silly you.

.

TahoeDawgZ71 · 02-19-2017, 09:55 PM

Quote:

Originally Posted by Tractor9n

Did some more research and finally ordered the Alltrax ACT48300 controller, solenoid/diode and WOW, did that do the trick, it really runs now, was holding my breath that I spent that kind of $ and it didn't work...

Pretty impressive huh?

Tractor9n · 02-23-2017, 05:10 PM

Yepper, took my neighbor for a ride and you would have thought he was on a carnival ride, he was laughing so hard...

TahoeDawgZ71 · 02-23-2017, 10:24 PM

Quote:

Originally Posted by Tractor9n

Yepper, took my neighbor for a ride and you would have thought he was on a carnival ride, he was laughing so hard...

02-03-2017, 06:25 PM	#12
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10	Re: 48v Club Car, solenoid clicks, won't run... Thanks....
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10

02-06-2017, 12:00 PM	#13
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10	Re: 48v Club Car, solenoid clicks, won't run... Can anyone tell me what the ohm value of club car motor should be, between A1 & A2 and F1 & F2? Windings show very little ohms, I know they call it a shunted motor, but the ohn values are only like 4 ohm between A1 & A2. Any idea's?
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10

02-06-2017, 12:26 PM	#14
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: 48v Club Car, solenoid clicks, won't run... Normally You just test for continuity (no continuity=bad motor) as most folks will not have the proper equipment needed to measure the low resistance values. For a typical ADC Sepex motor found on a Precedent (@75°F): Armature: 0.012Ω Field: 1.75Ω

02-06-2017, 01:06 PM	#15
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10	Re: 48v Club Car, solenoid clicks, won't run... I have low ohm resistance, will check again against your post. Can you jump the motor directly from the batteries to try the motor itself?
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10

02-17-2017, 04:53 PM	#16
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10	Re: 48v Club Car, solenoid clicks, won't run... Did some more research and finally ordered the Alltrax ACT48300 controller, solenoid/diode and WOW, did that do the trick, it really runs now, was holding my breath that I spent that kind of $ and it didn't work...
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-17-2017, 07:00 PM	#17
tag50 Gone Wild Join Date: Apr 2014 Location: Oregon City, Or Posts: 1,977	Re: 48v Club Car, solenoid clicks, won't run... What? You doubted "The 3 Wise Men" of BGW? Silly you. .

02-23-2017, 05:10 PM	#19
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10	Re: 48v Club Car, solenoid clicks, won't run... Yepper, took my neighbor for a ride and you would have thought he was on a carnival ride, he was laughing so hard...
Tractor9n Not Yet Wild Join Date: Feb 2017 Posts: 10

Similar Threads
Thread	Forum
2004 club car ds solenoid clicks in f or r but no movement	Electric Club Car
club car solenoid clicks but won't go!	Electric Club Car
club car wont go but solenoid clicks has new controller	Electric Club Car
club car carryall 1 solenoid clicks but no go.	Electric Club Car
2003 Gas Club Car Solenoid clicks?	Gas Club Car