|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-01-2007, 08:54 PM | #1 |
Ford
Join Date: Dec 2006
Location: New Castle, Pa
Posts: 3,437
|
Throttle body question.
Ok, I have a 86 Marathon and the thing that the throttle cable goes into on the throttle body won't return to it's normal position after I let off the gas. Is there supposed to be a spring on it? There was never one with this one (at least not as long as I've had it) and it's always worked right.
Thanks for any help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-01-2007, 09:07 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
I'm not sure, but I think there should be a spring somewhere. Maybe on the gas pedal under the floor
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-01-2007, 09:11 PM | #3 |
Ford
Join Date: Dec 2006
Location: New Castle, Pa
Posts: 3,437
|
The gas pedals comin back and everythings under there that should be there. I did notice that there are 2 wholes on there, one for the accelerator cable and one for somethin else. I guess it's a spring.
|
01-02-2007, 10:13 AM | #4 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Yeah I think there is suppose to be a spring wrapped around the throttle control on the carb but its been a while since I've looked at one so I could be wrong.
|
01-02-2007, 10:20 AM | #5 |
Ford
Join Date: Dec 2006
Location: New Castle, Pa
Posts: 3,437
|
I think you might be right. I'm gonna go mess with it in a little while.
|