2009 Precedent 48v Not Running

[JWreck]

Hi all, already found lots of great info here so thanks for that. Yesterday my cart just decided to not run. Accessories were powering on, reverse buzzer would sound if I put it in reverse, but no motion or event attempt.

So I started troubleshooting...before I found the service manual. I disconnected the negative battery yesterday and now the reverse buzzer doesn’t sound at all either, and still not running.

Interestingly, I was going through the troubleshooting steps and got to the Tow/Run switch which the book says should have less than 5v when in Tow and near 50v when in Run. My cart registers 50v in Tow, to which the book says replace the switch if in it’s above 5v in Tow.

A) Any additional thoughts? I started down the MCOR path, but now I’m worried maybe I shot the OBC? I tried a reset procedure I found on here but no effect. Logic tells me that if the Tow/Run switch is bad as it seems to be, that validates why everything else was working but no drive.

B) Any idea where to snag a Tow/Run switch? I’m going to call a local shop tomorrow and I assume they have them, but I can’t find one online that looks like the currently installed one.

Thanks in advance!