09-09-2014, 07:10 PM | #1 |
Getting Wild
Join Date: Sep 2014
Location: Spring Hope NC
Posts: 128
|
old melex clicks won't go..voltage is wacky
First off I would like to say this is a great forum with great folks that really give great help and advice...hence
I got an old melex 152 or 252 i think...looks like the wiring diagram I got anyway. 36v...electronic controller... turn key on, put it in gear, press pedal, click and nothing...replaced solenoid and it clicks...but nothing, motor will not go I had the motor cleaned out and recoated...still nothing But here is what I have notice and Im not sure this is right...sounds crazy to me...using a multimeter...key off...im reading 30-32v at the motor at the A1 and A2 post?!?!?!? Is this right?? key on and press pedal it goes to 38v....but should it read that much at the motor with the key off... Here it is beginning of hunting season and my cart is dead...PLEASE HELP I am lost on this |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2014, 12:03 PM | #2 |
Not Yet Wild
Join Date: Sep 2014
Posts: 3
|
Re: old melex clicks won't go..voltage is wacky
I have a old model 112 melex cart and I had the same problem. Check your micro switches, the micro switch that controls the gas pedal could have gone bad like mine did. It's only a 10 dollar switch so it's a cheap fix
|
|
|
Similar Threads | ||||
Thread | Forum | |||
What is the difference between a Voltage Reducer & Voltage Converter | Electric Club Car | |||
solenoid clicks clicks clicks | Electric Club Car | |||
Pack voltage vs. voltage at charing receptacle | Electric Club Car | |||
wacky electrical readings | Electric Club Car |