|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-25-2017, 09:38 PM | #1 |
Gone Wild
Join Date: Jan 2011
Location: mascoutah,il
Posts: 386
|
xct controller install ??
I need some help,I have only worked on Exgo carts. Installing a XCT 48400 controller in a 2010 Precedent cart. I must have the controller mounted wrong because multi-plug wire will not reach the controller plug??http://www.buggiesgonewild.com/attac...1&d=1490495710
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2017, 10:12 PM | #2 |
Gone Wild
Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: xct controller install ??
Looks like you need to rotate it 180 degrees
|
03-26-2017, 02:24 AM | #3 |
Guest
Posts: n/a
|
Re: xct controller install ??
Last edited by 1sharphook; 03-26-2017 at 02:32 AM.. Reason: resize |
03-26-2017, 07:18 AM | #4 |
Gone Wild
Join Date: Jun 2014
Location: Concord, NC
Posts: 354
|
Re: xct controller install ??
This is how I did mine on my 2012 Precedent.
|
03-26-2017, 08:59 AM | #5 |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
This is how I did mine. I had to re route the main multi plug cable, and pull the extra slack out of it.
IMG_4938.jpg |
03-26-2017, 09:06 AM | #6 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: xct controller install ??
Please note that You should not use a pre-charge resistor with the XCT controller.
|
03-26-2017, 09:25 AM | #7 | |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
Quote:
I installed it because it came with the solenoid. But according to Scotty: "There is no harm in having the diode on the solenoid even if the controller has an internal diode. This would just be redundant protection." http://www.buggiesgonewild.com/elect...updates-5.html If there is a problem I will remove it. |
|
03-26-2017, 09:33 AM | #8 | |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: xct controller install ??
Quote:
|
|
03-26-2017, 09:52 AM | #9 | |
Gone Wild
Join Date: Jul 2016
Location: Ma
Posts: 425
|
Re: xct controller install ??
Quote:
http://www.alltraxinc.com/files/Doc1...ns-Learned.pdf |
|
03-26-2017, 09:59 AM | #10 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: xct controller install ??
Those are just generic notes written 7 years before the XCT was introduced, and do apply to most controllers.
Look at the install diagram for Club Car IQ/Excel: http://www.alltraxinc.com/files/DOC1...Q-WIRE-DIA.pdfNote #4 (upside down triangle) on the right side of the page. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Where did you install your controller? | Electric Club Car | |||
Install 400-500 controller? | Electric Club Car | |||
05 txt pds controller install | Electric EZGO | |||
Controller Install | Electric EZGO | |||
new controller install ?????????? | Electric EZGO |