Is my motor fried?

rking1998 · 07-03-2017, 06:05 PM

Remember, I am a newbie. My cart is an EZGO TXT DCS 36V. I bought a new Altrax XCT500 with a matching heavy duty solenoid from ScottyB.

Before I install my new controller, I am going through the test he sent me to determine if I have a short in my motor. Here is what I got:

S1 to S2 = 2.0 ohms
A1 to A2 = 95 ohms
A1 or A2 to the body = OL
S1 or S2 to the body = OL
A1 to S1 = 9.0 Mohms

I am concerned mostly about the A1 to A2 reading. I am thinking that the 9.0 Mohms reading from A1 to S1 is practically an open circuit.

Please give me feedback to tell me if I have a bad motor.

Thanks
Rick

07-03-2017, 06:05 PM	#1
rking1998 Getting Wild Join Date: May 2017 Posts: 94	Is my motor fried? Remember, I am a newbie. My cart is an EZGO TXT DCS 36V. I bought a new Altrax XCT500 with a matching heavy duty solenoid from ScottyB. Before I install my new controller, I am going through the test he sent me to determine if I have a short in my motor. Here is what I got: S1 to S2 = 2.0 ohms A1 to A2 = 95 ohms A1 or A2 to the body = OL S1 or S2 to the body = OL A1 to S1 = 9.0 Mohms I am concerned mostly about the A1 to A2 reading. I am thinking that the 9.0 Mohms reading from A1 to S1 is practically an open circuit. Please give me feedback to tell me if I have a bad motor. Thanks Rick
rking1998 Getting Wild Join Date: May 2017 Posts: 94

Similar Threads
Thread	Forum
Fried motor	Electric Yamaha
Fried motor?	Electric Club Car
I think my motor is fried. Need suggestions on what to do next.	Electric EZGO
Cable going to motor just fried.	Electric EZGO
Fried Motor?	Electric Club Car