|
|
|||||||
| Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
  |
|
|
Thread Tools | Display Modes |
03-18-2019, 09:23 AM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2017
Posts: 18
|
Stealth Apache
I have a 2009 48v Apache 4x4. When I cut it on it won’t run. All the lights etc work. I don’t hear any clicking like the solenoid cutting on. Batteries are fully charged. I don’t see anything wrong or bad wires anywhere or any blown fuses. Do you think it’s the solenoid or controller? What’s the best way to check them. Any help would be appreciated. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-18-2019, 09:34 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2019
Location: North Florida
Posts: 271
|
Re: Stealth Apache
If you are not hearing a click upon pressing the accelerator pedal, then I would start with the solenoid.
I am not familiar with the Apache system; is it built on an Ezgo platform? If so, you could also check the microswitch in the accelerator box. |
|
|
|
|
03-18-2019, 11:48 AM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2017
Posts: 18
|
Re: Stealth Apache
Thanks,
What is the best way to check the solenoid and the micro switch in the accelerator ? |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tie Rod end 2009 Stealth Apache 48v 4x$ | Lifted Golf Carts | |||
| Stealth Apache | Electric golf carts | |||
| Stealth Apache jumping | Electric golf carts | |||
| Need stealth Apache parts | Lifted Golf Carts | |||
| 2010 Stealth Apache 4x4 | Golf Carts and Parts | |||
Linear Mode
