|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-07-2010, 06:46 PM | #1 |
Not Yet Wild
Join Date: Jun 2010
Location: Union Hall, VA
Posts: 43
|
No power after replacing solenoid
I have a 96 DS club car, 36volt and for the 2nd time have replaced the solenoid but still have no power (batteries are fully charged). There is no click from the solenoid either.
Initially I wired the first one up incorrect so assumed I fried the solenoid and/or diod do this time I replace both and am certain it is wired correctly. When I jump the soleniod it moves but otherwise nothing. When I wired the first one wrong could I have effected the ignition? The limit switch? Also, this cart has a "snubber" that connects onto the small posts of the solenoid. Could that be bad? New to cart ownership so just picking this up. Any suggestions would be appreciated. |
|
|
Similar Threads | ||||
Thread | Forum | |||
no power to controller side of solenoid | Electric EZGO | |||
Solenoid does not clickand no power to controller | Electric EZGO | |||
no power to controller side of solenoid | Electric Club Car | |||
240-ohm resistor across main power solenoid? | Electric Club Car | |||
G9? Replacing stock air box with K&N? | Gas Yamaha |