|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
|
09-12-2019, 09:56 PM | #1 |
Not Yet Wild
Join Date: Aug 2019
Location: NY
Posts: 58
|
Yamaha G1 Throttle linkage
Before I take everything apart and break something ...is the throttle linkage (plastic) linkage available? I searched some parts sites but nothing was obvious... I have a lot of free play... are these standard threads? Are the plastic head diameters the same as my old VW?
|
09-13-2019, 03:08 PM | #2 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,805
|
Re: Yamaha G1 Throttle linkage
these? I think there are different ones though
https://www.ebay.com/itm/YAMAHA-GENU...0AAOSwZ2pcZEpO edit: after digging there are 2 different ones, left thread and right thread. heres the part numbers. 4 total I think J10-14864-01 J10-14833-01 |
09-13-2019, 08:43 PM | #3 | |
Not Yet Wild
Join Date: Aug 2019
Location: NY
Posts: 58
|
Re: Yamaha G1 Throttle linkage
Quote:
Pricey $78 to replaced all 4... I am going another route I may try and use a generic unit if I can find .. |
|
09-15-2019, 10:54 AM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: Yamaha G1 Throttle linkage
You can eliminate all that factory linkage garbage and run the cable straight from the governor to the carb. You'll get better throttle action. If you do this, you'll have to wire the exhaust butterfly open or remove it.
|
Tags |
carberator issues, intake |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Throttle Linkage | Gas EZGO | |||
throttle linkage | Gas EZGO | |||
throttle linkage without gov arm? | Big Block Talk! | |||
Throttle linkage | Gas EZGO | |||
throttle linkage | Gas Columbia ParCar |