|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-12-2021, 06:34 AM | #1 |
Not Yet Wild
Join Date: Sep 2012
Posts: 23
|
2008 RXV drive fault
Hi All
Looking at 2008 RXV and Danaher handheld is coming up with ‘Drive Fault’ under errors and ‘Power Reduction’ under warnings. What I have noted is when the cart doesn’t work the above is displayed plus I only get 46.7v on the controller side of the solenoid and 50v on the battery side, at rest. When the cart works I get none of the error/warning messages plus I get virtually the same voltage (50v) on either side of the solenoid. I did swap out the old solenoid, which was the original long skinny type. Any ideas? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-12-2021, 07:37 AM | #2 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,234
|
Re: 2008 RXV drive fault
Your cart calls for a 36v continues solenoid remember. Trombetta makes a good solenoid.
|
04-12-2021, 03:22 PM | #3 |
Not Yet Wild
Join Date: Sep 2012
Posts: 23
|
Re: 2008 RXV drive fault
Thanks for your reply
I did install a Trombetta |
04-12-2021, 04:12 PM | #4 |
Gone Wild
Join Date: Feb 2016
Posts: 229
|
Re: 2008 RXV drive fault
I think the solenoid may have an internal problem. If you replace it make sure you don't over tighten the nuts on the studs. If the post turns it can damage the solenoid.
|
04-13-2021, 05:54 AM | #5 |
Not Yet Wild
Join Date: Sep 2012
Posts: 23
|
Re: 2008 RXV drive fault
Thanks for your reply however I made sure the terminals were not over tightened.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Drive Fault on 09 RXV | Electric EZGO | |||
EM Brake Drive OC Fault | Electric EZGO | |||
Ezgo RXV Drive fault | Electric EZGO | |||
Rxv drive fault | Electric EZGO | |||
Yamaha Drive Fault Codes | Electric Yamaha |