lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint


Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-30-2020, 11:19 AM   #1
squirt199
Not Yet Wild
 
Join Date: Aug 2019
Posts: 26
Default Painting Metal Body '95 ez-go 2 stroke

Hi, Noticed the Sticky regarding prep for painting plastic bodies.

OP said he may add one for metal bodies but I didn't see it.

My question is, does a metal body need AP? Is it just plastic that requires it?

Also regarding flaking from the previous job (Not me) can I buy a gel stripper to remove the old paint, instead of sanding? (Id prefer a sandblaster...)

I would suspect I do not need AP for Metal but I should buy a good quality primer or metal. Having also read a related thread, I can go to an auto body shop and by aerosol cans with a one stage all in one primer/paint/clear?

Any input would be appreciated.

thanks,

Alex
squirt199 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-30-2020, 03:13 PM   #2
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
Default Re: Painting Metal Body '95 ez-go 2 stroke

No adhesion promoter required on metal. Stripper can be used however I would be sanding afterword and doing any body work. I would suggest a good quality automotive primer followed by wet sanding. Now you are ready for top coat, single stage or two stage, base coat clear coat, or ant other automotive quality paint.

Check this thread, cart was done with base coat clear coat, I added multi color flake to the clear coat.
>>> https://www.buggiesgonewild.com/showthread.php?t=107

TheNewGuy is offline   Reply With Quote
Old 07-30-2020, 04:42 PM   #3
squirt199
Not Yet Wild
 
Join Date: Aug 2019
Posts: 26
Default Re: Painting Metal Body '95 ez-go 2 stroke

thanks,

Nice Willys BTW.. lol
squirt199 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center > Body and Paint


Thread Tools
Display Modes


Similar Threads
Thread Forum
2 stroke oil seal - metal casing? Gas EZGO
Rattle can Painting metal bodies? Body and Paint
Medalist metal body Golf Carts and Parts
EZ GO with METAL body? Electric EZGO
90 ezgo metal body Electric EZGO


All times are GMT -5. The time now is 03:17 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.