|
On Road Golf Carts! Low to the ground Golf Carts! |
|
Thread Tools | Display Modes |
07-18-2011, 08:22 AM | #1 |
Getting Wild
Join Date: Jun 2011
Location: Tampa, FL
Posts: 135
|
Weight Distribution Front/Rear
After adding a rear flip seat, then a HD spring, the rear weight bias is just through the roof. As a road race guy, I prefer to get 50/50 weight distribution. I'd love to hear some ways that some of you have gotten more weight shifted to the front axle. The way it is now, the steering is very light and the front wheels dance and wiggle over gravel and grass.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-18-2011, 08:47 AM | #2 |
Gone Wild
Join Date: Oct 2010
Location: temecula ca.
Posts: 202
|
Re: Weight Distribution Front/Rear
Stretch it!
|
07-18-2011, 10:29 PM | #3 |
Not Yet Wild
Join Date: Jul 2011
Posts: 29
|
Re: Weight Distribution Front/Rear
if its an electric id assume you could add a battery or 2 inside the front cowl?
|
07-19-2011, 09:47 AM | #4 |
Gone Wild
Join Date: Oct 2010
Location: temecula ca.
Posts: 202
|
Re: Weight Distribution Front/Rear
You could there is plenty of room, but for what your after there will be a lot more weight on front, with just a driver.
|
07-19-2011, 12:23 PM | #5 |
Getting Wild
Join Date: Jun 2011
Location: Tampa, FL
Posts: 135
|
Re: Weight Distribution Front/Rear
Thinking a steel push bar might help too.
Stretchman, is your cart lifted? |
07-19-2011, 12:50 PM | #6 |
Gone Wild
Join Date: Oct 2010
Location: temecula ca.
Posts: 202
|
Re: Weight Distribution Front/Rear
This black one is not
Here this blue one is lifted |
07-19-2011, 01:14 PM | #7 |
Getting Wild
Join Date: Jun 2011
Location: SoCal / Torrance
Posts: 80
|
Re: Weight Distribution Front/Rear
|
07-19-2011, 04:04 PM | #8 |
Gone Wild
Join Date: Oct 2010
Location: temecula ca.
Posts: 202
|
Re: Weight Distribution Front/Rear
I made it . One off.
|
07-19-2011, 04:56 PM | #9 |
Getting Wild
Join Date: Jun 2011
Location: SoCal / Torrance
Posts: 80
|
Re: Weight Distribution Front/Rear
|
07-20-2011, 09:17 AM | #10 |
Gone Wild
Join Date: Oct 2010
Location: temecula ca.
Posts: 202
|
Re: Weight Distribution Front/Rear
It took way to long to build it and I didnt keep track of my measurements/bends, I dont drag the bender out much anymore, I used to build roll bars all the time for my limo carts mostly use tops now
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G1 Front and Rear Bench | Gas Yamaha | |||
hd front rear switch | Electric EZGO | |||
EZGO with weight on rear swerving at high speeds | Electric EZGO | |||
Rear end oil weight advice | Electric EZGO | |||
G16 body Rear and Front $135 | Golf Carts and Parts |