06-18-2019, 10:55 AM | #1 |
Gone Wild
Join Date: Sep 2012
Posts: 245
|
Leaf Lithium battery pack/box build basic questions
I am building the battery pack and want to confirm a few things first.
1. do the modules need any plates between them? I have the factory end plates (4 of them), and I have thin strips that seem to be placed between some modules based on pics I have seen on here. But I don't see the need for them. 2. I assume the modules naturally stack together with opposing terminals near each other (so that I can connect the small bus bars from positive to negative). 3. Does anyone have a diagram or pic of how to run the bus bars and the wiring for the BMS? I want to make sure I am hooking that part up right!!! Thanks |
|
|
Similar Threads | ||||
Thread | Forum | |||
DIY 101 - 14 cell Nissan Leaf lithium pack | All things Lithium | |||
Bit the bullet Leaf Lithium build | Lithium EZGO | |||
72V Lithium conversion basic questions for noobe | Lithium EZGO | |||
A look inside Nissan Leaf lithium battery pack | All things Lithium | |||
Lithium RXV build with leaf cells | Electric EZGO |