|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-03-2013, 01:21 PM | #1 |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
1999 Shuttle 6 Solenoid Clicks & 0 movement
48V 1999 Shuttle 6. Solenoid clicks when pressing the pedal, yet I get 0 movement. Anyone have any ideas or a wiring diagram for this model? Batteries are brand new and fully charged, all connections look good.
Thank you! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-03-2013, 02:13 PM | #2 |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
Re: 1999 Shuttle 6 Solenoid Clicks & 0 movement
Did M- & B+ No initial voltage / solenoid clicks still no voltage. To the floor, I get 0 voltage.
|
09-03-2013, 04:34 PM | #3 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1999 Shuttle 6 Solenoid Clicks & 0 movement
That attached might help.
Except for 2 more batteries and different model controller, it looks like a regular series drive system. No voltage between B+ and M- when solenoid clicks is normal. It should increase when pedal is pushed. I prefer measuring between B- and M- initially, it starts at full pack voltage when solenoid clicks, which tells you if the high current circuit is intact, and then drops to zero as pedal is pushed to floor. |
09-04-2013, 08:19 AM | #4 |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
Re: 1999 Shuttle 6 Solenoid Clicks & 0 movement
Thanks, I will check that out now.
B- & M-, shows 48ish, I press the pedal, it goes up to 50.5 roughly. |
09-04-2013, 08:48 AM | #5 |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
Re: 1999 Shuttle 6 Solenoid Clicks & 0 movement
I removed wire #2 and placed the positive lead on it while keeping the neg on B-, I got 13.8V with the pedal down.
Also went to terminal #3, (white), went from 1.6 to 2.5 and stayed at 2.5 with the pedal to the floor. It has a new ITS in it, but that doesn't always mean it's good. M- to B+, voltage is 0, in F with the pedal down, it's still at 0. Instructions are saying it's going to need a new controller. |
09-04-2013, 09:04 AM | #6 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1999 Shuttle 6 Solenoid Clicks & 0 movement
Quote:
When the solenoid first clicks, you should read full pack voltage. Then, as you push the pedal further, the voltage should decrease towards zero, reaching near zero when pedal is on floor. |
|
09-04-2013, 09:05 AM | #7 |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
Re: 1999 Shuttle 6 Solenoid Clicks & 0 movement
Which it didn't do, so is that confirming that it will need a new controller?
|
09-04-2013, 09:30 AM | #8 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 1999 Shuttle 6 Solenoid Clicks & 0 movement
Quote:
I'd replace it with an Alltrax AXE500 or SMP-500 (or bigger ) http://www.cartsunlimited.net/Custom_Options.html |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZ GO Electric Cart Clicks but NO movement Forward or Reverse!! | Electric EZGO | |||
1988 Five Clicks with no movement | Electric Club Car | |||
selenoid clicks, no movement | Electric EZGO | |||
Pedal clicks but no movement | Electric EZGO | |||
96 CC 48V Solenoid clicks no movement - Newbie | Electric Club Car |