lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-19-2019, 02:14 PM   #1
i.weber
Not Yet Wild
 
Join Date: Sep 2019
Posts: 47
Default 2g Cables For Alltrax XTC

Can someone give this newbie a rundown on exactly what wires should be replaced when doing a controller upgrade? I purchased a 2g cable pack from Scotty and it came with more cables than I anticipated. Do I need to swap any of the cables running from the controller to the motor? Thanks!

Sent from my SM-G975U using Tapatalk
i.weber is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
HELP!! Installed Alltrax 500 amp with 400 solenoid and 2g cables - going SLOWER Electric EZGO
alltrax 500 #4 cables software upgrade 34MPH Electric Club Car
No throttle - New Alltrax, solenoid, cables Electric Club Car
Alltrax Dcx500, 400a solenoid, 2 gauge cables Golf Carts and Parts
Alltrax AXE4855 and #4 cables Golf Carts and Parts


All times are GMT -5. The time now is 12:46 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.