Cart will not go or just squeals

[chopndroptx]

Hello everyone! I now have a 2016 Precedent with EFI.

I am trying to figure out why my cart will not go sometimes on the first few pedal pushes, it either does nothing or squeals and that's it. After 2+ presses it starts going.

Could this be the solenoid or the starter maybe?

[1arunem]

Belt slipping?

[chopndroptx]

Originally Posted by 1arunem

Belt slipping?

I thought that too, but then thought why wouldn't it just keep on slipping or start eventually. It just squeals then nothing, when it does squeal.

[yankee dog]

My guess is starter belt slipping, then it grabs and starts like normal. YD

[chopndroptx]

Originally Posted by yankee dog

My guess is starter belt slipping, then it grabs and starts like normal. YD

Might be right, I don't know how long they are suppose to spin to start. I guess after the initial short spin it runs freely to charge the system....

After the squeal, you get nothing, no noise or nothing, like its dead.

I ordered a new belt to see if it helps, will hopefully get it next week.

[FloridaCart]

Tighten up your starter/Generator belt. You probably don't need a new one.

[Wynelocked]

Originally Posted by chopndroptx

Might be right, I don't know how long they are suppose to spin to start. I guess after the initial short spin it runs freely to charge the system....

After the squeal, you get nothing, no noise or nothing, like its dead.

I ordered a new belt to see if it helps, will hopefully get it next week.

Did the new belt fix your issue?Mine squeals loud...then does nothing

[chopndroptx]

Originally Posted by FloridaCart

Tighten up your starter/Generator belt. You probably don't need a new one.

I bought the cart used a while back and I am not sure how old the current belt is, so I will just change it out.

[chopndroptx]

Originally Posted by Wynelocked

Did the new belt fix your issue?Mine squeals loud...then does nothing

I won't get the new belt until next week probably. I will update you after I get it swapped.

[Fairtax4me]

Belt is worn or loose. The EFI engine has a higher compression than previous engines so it seems more prone to have the belt slip. Use a genuine Club Car belt. Aftermarkets will slip worse.