Resistor got solid state conversion

[huntingcart2393]

Originally Posted by handtools

That is what I did when I converted my resistor cart to solid state. I bought resistors of the correct values off ebay and installed them in my old v-glide.

Attachment 196370

Attachment 196371

Can you give me some guidance on where to wire everything. Mainly needing to know where the wires for the v glide go to. I assume they now go to the controller? I’m a little lost. I’ve got the new resistor kit installed and the solenoid mounded. Starting to wire now

[huntingcart2393]

Originally Posted by handtools

That is what I did when I converted my resistor cart to solid state. I bought resistors of the correct values off ebay and installed them in my old v-glide.

Attachment 196370

Attachment 196371

Can you give me some guidance on where to wire everything. Mainly needing to know where the wires for the v glide go to. I assume they now go to the controller? I’m a ltitle lost. I’ve got the new resistor kit installed and the solenoid mounded. Starting to wire now

[handtools]

I think if you read this thread it will answer all of your questions.

http://www.buggiesgonewild.com/elect...eter-have.html

[huntingcart2393]

Originally Posted by handtools

I think if you read this thread it will answer all of your questions.

http://www.buggiesgonewild.com/elect...eter-have.html

Okay, I appreciate it a lot!

[huntingcart2393]

Update:
Just ordered an alltrax sr-48500 and reverse contacting f/r switch. Got all my 2 awg wires and am currently waiting on everything to come in to get hooked up

[huntingcart2393]

Still have a long ways to go but everything is now operational! Still some cleaning up to do with the wiring and need to install my 12v reducer. Then it goes to all the suspension and lift!

6BFDE9C3-EF1E-4648-9F0A-EC77F8A0138C.jpg

2CC8CFD7-585C-42CE-86C2-C9DC93C3350F.jpg

824E18CF-1256-48BC-8880-D03100FDF71E.jpg

B7AAFBD1-E507-43CC-BA48-B6F7A65A7DA9.jpg

A689BEF4-9F5A-4AB4-84BB-714BD89E4B38.jpg

[handtools]

Looking good!

[huntingcart2393]

3D6688CA-B45B-4882-9D41-3C63964113E3.jpg

09DE4DF4-64B0-43AD-85EE-18D086C2CC05.jpg

20689F86-9E06-42B6-B640-6553F208ADA1.jpg

All electrical work is done. With the cart now being 48 volts it has so much torque its spinning the wheels inside of the tire. Maybe tires are to old, maybe too much torque. Who knows lol
Next up is camo wrap and lift kit

[huntingcart2393]

FF04D553-B20F-4E50-A082-1BEAD3B4ADC0.jpg

8FEEE43A-EC31-4F4C-97ED-5954204102F2.jpg


Got the axle and shocks painted yesterday. Lift kit and Camo wrap will be delivered today! Everything is operational, now just installing the bells and whistles

[huntingcart2393]

4B0AD403-872A-4726-8BA5-DCD396E7B8B5.jpg

Started on the Camo wrap! It’s coming out great, but looks like I will need to order more to finish the rear body