|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-07-2012, 09:11 PM | #1 |
Gone Wild
Join Date: Dec 2011
Location: Columbia, South Carolina
Posts: 258
|
Battery cable removal
Can somebody point me to the thread that tells you what cables to disconnect first when upgrading the controller and solenoid? I seem to have remembered reading somewhere that there is an order or at least one first. I have a 48 volt 2006 precedent and next week will be upgrading to an Altrax DCX 400IQ, 2ga cables, and the HD solenoid. Any help is appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-07-2012, 10:29 PM | #2 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Battery cable removal
you need to put cart in tow and disconnect the 1st cable and the last cable on the system.......that is your main pos and main neg cables.....that cuts power to the pack, you can work on controller and solenoid and than you can remove and replace 1 cable at a time.....make those 2 hook-ups your last...........................
|
01-08-2012, 08:32 AM | #3 |
Gone Wild
Join Date: Dec 2011
Location: Columbia, South Carolina
Posts: 258
|
Re: Battery cable removal
Ok thanks. I thought I read somewhere to remove the ground first. Is that correct?
|
01-08-2012, 08:57 AM | #4 |
Gone Wild
Join Date: Sep 2011
Location: East Michigan
Posts: 1,364
|
Re: Battery cable removal
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Battery removal | Electric Club Car | |||
Battery cable | Electric Club Car | |||
Battery Cable | Electric golf carts | |||
Battery cable getting HOT | Electric EZGO | |||
Idiot Question on Reverse cable removal! | Gas Yamaha |