05-21-2022, 05:17 PM | #81 |
Not Yet Wild
Join Date: Feb 2020
Location: Buckeye, AZ
Posts: 26
|
Re: 2022 Icon programming cable
I have reprogrammed around 15 Icons here in the golf community in AZ where I live. Went to do one today and couldn't get communication. Of course, it was a new 2022 cart so I immediately went here to see if something was different. Of course, it is.
Can someone help me out with the software? Pretty please? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-21-2022, 06:55 PM | #82 |
Not Yet Wild
Join Date: Sep 2018
Location: Puyallup WA and Eloy AZ
Posts: 4
|
Re: 2022 Icon programming cable
|
12-27-2022, 01:21 PM | #83 | |
Not Yet Wild
Join Date: Dec 2022
Posts: 4
|
Re: 2022 Icon programming cable
Quote:
Thanks for any help. |
|
12-27-2022, 02:23 PM | #84 |
Gone Wild
Join Date: Apr 2022
Posts: 327
|
Re: 2022 Icon programming cable
Yes, you'll need to crimp the pins on to the three wires coming out of the cable.
|
12-27-2022, 05:27 PM | #85 |
Not Yet Wild
Join Date: Dec 2022
Posts: 4
|
Re: 2022 Icon programming cable
Ok, got that done, now where do I plug it in? Tried what looked like a plug into the charger, that didn't work, and tried the EMB port under the run button, also didn't work. Took off the panel under the the back seat, saw nowhere to plug it...
|
12-27-2022, 06:17 PM | #86 |
Gone Wild
Join Date: Apr 2022
Posts: 327
|
Re: 2022 Icon programming cable
There should be only one connecter it mates with, which is next to the emb switch. If it doesn't work, try swapping rx and tx.
|
12-31-2022, 01:57 PM | #87 |
Not Yet Wild
Join Date: Dec 2022
Posts: 4
|
Re: 2022 Icon programming cable
OK found,but still getting the Red dot near Comm when trying to connect. Has anyone successfully connected with the 3 wire cable solution? Tried swapping them as well no luck....
|
12-31-2022, 03:37 PM | #88 |
Gone Wild
Join Date: Apr 2022
Posts: 327
|
Re: 2022 Icon programming cable
Yes. I only use 3 wires. See the picture I attached. Ignore the red wire. This is a special cable I made for a Bluetooth adapter that needs the power. You don't.
This view is the backside of the connector as if you were looking into it when plugged into the cart. The white wire should be connected to the tx pin on your USB serial adapter. The yellow wire should be connected to the rx pin on the adapter. Make sure it is in 3.3 v mode. Also make sure you have the correct drivers installed and you have chosen the correct com port. |
01-03-2023, 12:44 PM | #89 | |
Not Yet Wild
Join Date: Dec 2022
Posts: 4
|
Re: 2022 Icon programming cable
Quote:
and then wired it directly to the molex connector. Did I screw that up as well? |
|
01-03-2023, 01:07 PM | #90 |
Gone Wild
Join Date: Apr 2022
Posts: 327
|
Re: 2022 Icon programming cable
You have the correct adapter. Ignore the board in my picture.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2022 ICON Motor Controller | Icon | |||
How to make your own ICON programming cable | Icon | |||
2022 Epic by Icon 40L | Icon | |||
2022 Icon I40L first electric cart | Icon | |||
For Sale: CANUSB & Programming Cable (Icon, EV, Aetric, Advanced ED) | Golf Carts and Parts |