|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-08-2012, 10:32 AM | #1 |
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
lowering mt txt
I have got some 2" square tubing to use as lowering blocks for the rear of my next build. Does anyone have pics of how they modified the blocks to move the rear axle 3/4" forward. I know it requires a hole drilled in the tubing and also a nub to accept the springs. But is the hole or nub centered in the 5" length of tube and the opposite, nub or hole, 3/4" inch away?
On the other hand, doing the front, I know to swap end front to rear on the springs, but are they flipped over too or are they the same profile as in the stock position? Any pics would be great. Thanks yall. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lowering a g2/g9? | Gas Yamaha | |||
Lowering Front | Electric EZGO | |||
lowering | On Road Golf Carts! | |||
lowering | Design Center | |||
lowering an ez go? | Design Center |