lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-03-2022, 06:03 PM   #1
Aaron817
Not Yet Wild
 
Join Date: Sep 2022
Location: DFW, TX
Posts: 7
Default 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

Was working on reprogramming my new cart. Things initially seemed good, but at some point in time it seems like the max motor RPMs changed to 6600 from 7200 and will not let me set any settings any higher than 6600. I am99% sure that I had it at 7100RPM and a higher MAX speed prior to whatever happed that set it to 6600.

02.01.10 Motor MAX Speed MAX = 6600

Anyone have any thoughts on how to fix?

Appreciate any ideas anyone has. Thanks!
Attached Images
File Type: jpg Tevd_ICON_LIVE.jpg (177.1 KB, 0 views)
Aaron817 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-03-2022, 06:29 PM   #2
__JAG__
Getting Wild
 
Join Date: Apr 2022
Posts: 121
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

Quote:
Originally Posted by Aaron817 View Post
Was working on reprogramming my new cart. Things initially seemed good, but at some point in time it seems like the max motor RPMs changed to 6600 from 7200 and will not let me set any settings any higher than 6600. I am99% sure that I had it at 7100RPM and a higher MAX speed prior to whatever happed that set it to 6600.

02.01.10 Motor MAX Speed MAX = 6600

Anyone have any thoughts on how to fix?

Appreciate any ideas anyone has. Thanks!
What else did you change? Did you save your initial settings?
I've never seen any that are not 7200 max. Did you change any of the motor parameters?
__JAG__ is offline   Reply With Quote
Old 10-03-2022, 07:19 PM   #3
Aaron817
Not Yet Wild
 
Join Date: Sep 2022
Location: DFW, TX
Posts: 7
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

Quote:
Originally Posted by __JAG__ View Post
What else did you change? Did you save your initial settings?
I've never seen any that are not 7200 max. Did you change any of the motor parameters?
No. The last setting I changed before I noticed the RPMs was 8.3.1 for regenerative braking.

I am almost positive I had changed 10.01.07 to 7100 (which also upped the kph setting 03.02.01). Now 6600 is as high as 10.01.07 will go.

Unfortunately, like a knucklehead, I dont have a backup. Was keeping notes of what all I changed.

Doesnt seem like there should have been any way for me to change the max RPM setting for the motor.
Aaron817 is offline   Reply With Quote
Old 10-04-2022, 03:02 PM   #4
Stroked250
Not Yet Wild
 
Join Date: May 2022
Posts: 61
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

I assume your cart is brand spanking new? It seems that new carts have a max limit of 6600 vs the older ones with 7200. At 6600 you should get about 27mph. I have a new LVtong controller and its max is also 6600.

I dont plan to adjust the gear or tire ratios to increase it, but it should be possible.

And the kph value is now forced lower than before too.
Stroked250 is offline   Reply With Quote
Old 10-04-2022, 03:19 PM   #5
__JAG__
Getting Wild
 
Join Date: Apr 2022
Posts: 121
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

Max speed is a factor of the max motor RPM and gear ratio.
That sucks they are limiting it to 6600rpm. But depending on gear ratio that may be wise since so many people are modifying with software now. They are probably monitoring the facebook groups.

I've had mine up to 37mph which is very fast and feels very unstable.
__JAG__ is offline   Reply With Quote
Old 10-04-2022, 04:00 PM   #6
Aaron817
Not Yet Wild
 
Join Date: Sep 2022
Location: DFW, TX
Posts: 7
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

Quote:
Originally Posted by Stroked250 View Post
I assume your cart is brand spanking new? It seems that new carts have a max limit of 6600 vs the older ones with 7200. At 6600 you should get about 27mph. I have a new LVtong controller and its max is also 6600.

I dont plan to adjust the gear or tire ratios to increase it, but it should be possible.

And the kph value is now forced lower than before too.
Ah! Appreciate the info. Yes, it is brand new. Glad I am not losing my mind here.

I just want it to run at 30 so I am not slowing up traffic on the roads.
Aaron817 is offline   Reply With Quote
Old 10-04-2022, 07:47 PM   #7
derelicte
Gone Wild
 
Join Date: Apr 2022
Posts: 322
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

What version fw is the controller running?
derelicte is online now   Reply With Quote
Old 10-04-2022, 09:23 PM   #8
Aaron817
Not Yet Wild
 
Join Date: Sep 2022
Location: DFW, TX
Posts: 7
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

Quote:
Originally Posted by derelicte View Post
What version fw is the controller running?
Firmware version 200
Attached Images
File Type: jpg Tevd_ICON_LIVE_tab01.jpg (324.8 KB, 0 views)
Aaron817 is offline   Reply With Quote
Old 10-04-2022, 10:16 PM   #9
Stroked250
Not Yet Wild
 
Join Date: May 2022
Posts: 61
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

Firmware 200 here too. I know Advanced has been updating their programs. It appears the set a new, lower max value to limit top end.
Stroked250 is offline   Reply With Quote
Old 10-05-2022, 01:32 PM   #10
derelicte
Gone Wild
 
Join Date: Apr 2022
Posts: 322
Default Re: 2022 Icon i40FL programming ? - Motor shows 6600RPM MAX

I wonder what would happen if you loaded a config with a 7200 rpm limit on the controller...
derelicte is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Thread Tools
Display Modes


Similar Threads
Thread Forum
2022 Icon programming cable Icon
2022 Icon Programming Cable Icon
2022 Icon Programming Software Icon
2022 Icon Programming Issues Icon


All times are GMT -5. The time now is 07:41 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.