|
Ezgo Gas Tech Resource info, wiring diagrams and how to's for Gas powered EZGO golf carts |
|
Thread Tools | Display Modes |
11-10-2008, 09:29 AM | #1 |
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Electric Lift for Workhorse dump bed
Don’t know if this is worthy of a sticky?
Electric lift for workhorse dump bed components that will seamlessly fit factory mounts. Warner Electric liner actuator# K2xG20 (2200 lb cap, 6” throw) You can use any that is 14” to 15” closed dimension. Napa switch# TG7071 (Momentary on /off/ momentary on 6 pole) Napa 30amp breaker# 782-3105 1) ½” x 3” clevis pin 1) ½” x 1-7/8 to 2” clevis pin 2) 3/8” spacers (I used 1/2" SAE washers) 3) cotter pins (appropriately sized for clevis pins) Red and black primary wire, I used 14 gauge about 15’ ea. 15’ 1/2” split loom cut to length. cost me ttl $143.00 |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
questions about lift, wheels, tires for workhorse st 480 | Gas EZGO | |||
Heavy duty electric dump kit | Gas EZGO | |||
Electric lift for dump bed. | Electric EZGO | |||
electric dump lift | Gas EZGO | |||
Workhorse Lift? | Gas EZGO |