|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-04-2017, 10:15 PM | #1 |
Not Yet Wild
Join Date: Feb 2016
Posts: 31
|
Precedent Alltrax XCT install, solenoid doesn't click
Just installed an Alltrax XCT and high amp solenoid on a 2009 cc precedent. Batteries are brand new. After connecting everything, checking wires, double and triple checking wires again, I put the tow switch to run, flipped the key switch on, put it in forward, and nothing. The controller has a green solid light on. Cables are 4awg welding cable.
I did realize that the neg battery cable is not running through the OBC, which I will fix tomorrow. I think that should only keep the cart from charging, though, correct? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-04-2017, 10:30 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
No. That will not keep it from running. Can you plug your computer into the diagnostic port? The Alltrax toolkit is a free download and it will tell you why it's not running.
|
03-04-2017, 10:53 PM | #3 |
Not Yet Wild
Join Date: Feb 2016
Posts: 31
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
I did just realize the LED on the controller blinks green 5 times and then goes solid green when you turn the key on.
Plugged the controller in to the laptop, and it shoes "true" for charger plugged in, yet the charger is definitely not plugged in. I'm sure this is why the cart isn't moving. Also, HPD Satisfied bounces back and forth from tire to false. Everything else looks to be functioning. Battery bolts are 49.9 across the pack. Throttle is also reading correctly, as I notice the throttle goes to 100% when the pedal is pressed. So where do I begin to fix the charger plugged in issue? |
03-05-2017, 12:12 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
I don't have the open program in front of me but, I believe there are 2 selections or the charger monitor mode. (lower right hand corner of page 1) Simply selection the other option and try going?
|
03-05-2017, 08:00 AM | #5 |
Not Yet Wild
Join Date: Feb 2016
Posts: 31
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
I see only one listing of charger plugged in, and it says "true". When I try to click the button, it remains in the "true" position. I am referring to the "monitor" screen inside of the alltrax toolkit 3.4.
|
03-05-2017, 08:33 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
With the XCT program open select show charger interlock and select the High/Low option or N/C
I seem to remember 2 options - I'm saying try the other mode. |
03-05-2017, 10:47 AM | #7 | |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
Quote:
|
|
03-05-2017, 02:36 PM | #8 | |
Not Yet Wild
Join Date: Feb 2016
Posts: 31
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
Quote:
I have a tab for controller settings, throttle settings, and monitor. It does not give me an option to select charging settings on any of these pages. On the controller page, near the bottom of the page, there are subpages inside of the controller page named "normal", "user1", and "user2". Normal shows the dual switches to be down, user1 shows the dual switch to be up/down, and user2 shows down/up. Scotty, is this what you're referring to? |
|
03-05-2017, 02:38 PM | #9 |
Not Yet Wild
Join Date: Feb 2016
Posts: 31
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
|
03-05-2017, 03:57 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Precedent Alltrax XCT install, solenoid doesn't click
MCOR is the correct throttle setting, then.
Are you sure you are scrolling down to see the whole page (normal, user1, user2) is not the bottom of the page on my screen. Sorry I don't have one in front of me now to plug in ..... |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2004 Club Car Precedent no solenoid click | Electric Club Car | |||
2009 Precedent XCT48400 Alltrax install | Electric Club Car | |||
G16 No Solenoid Click | Gas Yamaha | |||
New Alltrax and Solenoid install: nothing working | Electric Club Car | |||
solenoid click then nothing. alltrax/converted from regen 1 | Electric Club Car |