|
Lifted Golf Carts Off-Road Golf Carts. |
|
Thread Tools | Display Modes |
02-19-2021, 05:37 PM | #1 |
Not Yet Wild
Join Date: Feb 2021
Location: Denver, CO
Posts: 6
|
Have a 6" Jakes Spindle - How easy to drop it to a 3"?
I'm new to golf cart ownership and recently purchases a 2019 CC Tempo that came with a 6" lift installed with 23/10/14 wheel/tire setup.
Most of the use is golf course, and 6" lift is just too much - my wife isn't tall enough to see what club she is pulling out of the bag! I don't have any of the original parts to "un-do" the lift and would like to settle with a 3" so I can continue to use the 215/50/12 wheel/tire setup that I ended up settling on to be course-friendly. Does anyone know if it is a simple swap of just a couple pieces going from a Jakes 6" to a Jakes 3"? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-20-2021, 09:56 AM | #2 |
Gone Loco
Join Date: Jul 2020
Location: South Florida
Posts: 1,123
|
Re: Have a 6" Jakes Spindle - How easy to drop it to a 3"?
It's got a Jake's kit on it for sure? For the front, it's just the spindle. The back is the blocks. Reach out to Jake's and see if you can buy just those parts. Otherwise you'll have to get a 3" lift kit, swap what you need to swap, then sell the half used kit.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Jakes 6" spindle with 23" tires | Lifted Golf Carts | |||
Madjax 6"Spindle Lift Vs. Jakes 6" Spindle Lift | Electric EZGO | |||
Precedent 6" spindle drop lift kit | Golf Carts and Parts | |||
Jakes 5" Drop Axle | Lifted Golf Carts | |||
Jakes Spindle lift 3" vs. 6" | Lifted Golf Carts |