Compatible Combo Lift?

[jeep monkey]

Resurrecting an old thread here but I’m pondering the same exact lift. Curious to know if the Jakes 3” drop spindle lift worked with the factory Valor suspension.


Sent from my iPhone using Tapatalk

[jeep monkey]

For closure, the Jakes 3” spindle lift does work well on the EZGO TXT /Valor in combination with the factory 2” higher ride height.

The front track width did increase by about 1.5”, so if your particular, you may want to buy rear spacers to match.


Sent from my iPhone using Tapatalk

[TARider]

Thanks for posting that up! I still haven’t gotten around to this. I keep getting distracted by other projects.

[WVHarley]

Originally Posted by BrewCityMusic

One thing to be prepared for, You're likely going to have to flip the brake backing plates over from side to side to get the arms under the axle or the leaf springs (once relocated above the axle as the kit requires) may interfere with them. If You're careful, there's no need to disassemble the brakes, just the 4 bolts on the backing plate and the cables.

[zingerbateman]

Originally Posted by jeep monkey

For closure, the Jakes 3” spindle lift does work well on the EZGO TXT /Valor in combination with the factory 2” higher ride height.

The front track width did increase by about 1.5”, so if your particular, you may want to buy rear spacers to match.



Sent from my iPhone using Tapatalk

Do you have any pictures after the lift? Also, how much total height do you think your at now with the 2 + 3"?

I have a 13 Valor and can't decide if I want a spindle lift or drop axle.

[zingerbateman]

Anyone?

[slonomo]

This is an old thread. I doubt the OP is watching it. You can click on his name and see if he's been online lately. Send him a pm.