|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-04-2011, 11:53 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2011
Posts: 4
|
Broken front roof support bolts
Recently purchased a 96 g16 and the bolts that secure the roof assembly are broke off, am I able to just tap these out and put new bolts in, if so what size are they?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-04-2011, 08:34 PM
|
#2 |
|
Gone Wild
Join Date: Feb 2011
Location: california
Posts: 151
|
Re: Broken front roof support bolts
I suppose you are referring to the 2 bolts holding the front windshield post. A 3/8 - inch bolt should work. If you want a bigger one, use 7/16.
|
|
|
|
|
05-04-2011, 09:15 PM
|
#3 |
|
Gone Crazy
 Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Broken front roof support bolts
The rest of the cart is metric but for some reason the front two strut bolts are 3/8-16.
Should be able to drill and try to extract first. Drilling might screw it on through, but try that before trying to drill and rethread. pull the front cowl if you need to. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| wtb club car ds front roof support | Golf Carts and Parts | |||
| TXT rear seat and roof support bracket | Electric EZGO | |||
| EzGo Roof Support | Electric EZGO | |||
| Speed control moutning plate/heatsink - remove broken bolts? | Electric EZGO | |||
| 95 front roof support | Gas Yamaha | |||
Linear Mode
